Putting a Terminator 2 PCB in a Revolution x 3 player?

[Danzig8155]

Ok, so awhile back I purchased a Revolution X cabinet from a guy off ebay for $75. The cab is the 3 player version. 33" monitor that works, all 3 guns (supposedly all work) the gun I/O board that I've not been able to test, and the sound as the same. No actual game PCB. I've used the cab to test a few Jamma boards I've gotten since then.

I have coming to me a Terminator 2 PCB that I'd like to stick in the cab to play for the time being. Upon some looking around I found .pdf versions of both manuals (the Rev X is for a 2 player cab). Comparing the two with the different plug ins, I noticed allboards are different. So I guess my question is, can I use the Terminator 2 PCB with the Rev X sound and gun board?

heres the rev x schematic, page 53

http://arcarc.xmission.com/PDF_Arcade_Manuals_and_Schematics/Revolution-X_2_Player_Operations_Manual_(16-40019-101)_May_1994.pdf

heres the T2, page 71

http://arcarc.xmission.com/PDF_Arcade_Manuals_and_Schematics/T2_Judgement_Day_(16-40009-101-1)_Dec_1991.pdf

[Danzig8155]

Well nevermind all....got the board in today and hooked up just to the video to see if the board worked....and it's dead. So it'll be awhile before i can tinker with it and see whats wrong.

Got the board running already. When in doubt, start pulling roms. Found one of the roms just practically fell off in my hand....pushed it into the socket nice n snug, and it worked fine.

So back to the original question as above. Or does anyone have a T2 sound board and gun I/O board they wanna part with. All I have for trade is five cats.