Main > Project Announcements
touch screen wall mount jukebox build
hobsonschoice:
Close up of VGA board and ribbon cable, I was always a bit worried about this ribbon cable a i moved it around so much i was afraid it was break, but it lasted through.
hobsonschoice:
A cheap USB hub, one of two, purchased from ebay.
hobsonschoice:
The above usb will be enclosed in the cab so is not really important but i want another 2 ports at least available from the side of the cab so i bought this, another cheapy.
This is a 4 port usb hub which the bottom two ports rotate 180 degrees, the idea is to push two through the side of the cab and leave the remaining two inside, I had to bust it open though to allow access to the two interior ports. very cheaply made and almost fell apart, but will suffice.
hobsonschoice:
Discarded power strip from monitor, totally unneeded
hobsonschoice:
ok, on to the build,
Now you'll see where i'm going with this.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version