| Main > Main Forum |
| 4 way joystick that doesnt need mounting plate? |
| << < (3/3) |
| jakejake28:
--- Quote from: AlanS17 on July 04, 2003, 10:26:18 pm --- I can't speak for the Japanese sticks that they sell on the Ultimarc site. Those actually seem like they would work. --- End quote --- my j-sticks and e-stick are great for 4 and 8 way. the prob with the j-stick tho is the reach. it is too hard to hit the micro's in pac-man quick enough, luckily my e-stick resolves that problem |
| hulkster:
well ive already drilled all the holes in my cp today. and its layout is 3 joysticks w/buttons across the cp. i just drilled a regular hole for the super 8 that will be my 4 way joystick, so if i ever want to convert, then i can find a router some where and cut the square. but i guess ill just have to settle for a while. this is my first cab, so its not that big of a deal i guess. |
| J_K_M_A_N:
--- Quote from: DeafBug on July 04, 2003, 08:06:11 pm --- I went over to Oscars and I can't find the price or part list for the mounting plate to order. I did find this template --- End quote --- It is on the price and ordering info page. Scroll down about half way and it says "Joystick Mounting Plate". You have the option of Black Dimpled, primer or blank. Price of $15. Can't miss it. Good luck. J_K_M_A_N |
| paigeoliver:
--- Quote from: hulkster081 on July 05, 2003, 12:36:55 am ---well ive already drilled all the holes in my cp today. and its layout is 3 joysticks w/buttons across the cp. i just drilled a regular hole for the super 8 that will be my 4 way joystick, so if i ever want to convert, then i can find a router some where and cut the square. but i guess ill just have to settle for a while. this is my first cab, so its not that big of a deal i guess. --- End quote --- Who needs a router or a jigsaw? I don't have either. I cut my square hole out using a freaking drill and a drill bit. I have done this multiple times in the past too. Then put a piece of sheet metal over the hole. Install the stick to the sheet metal. I used a rather thick piece that I found laying around. |
| DeafBug:
--- Quote from: J_K_M_A_N on July 05, 2003, 11:23:30 am --- --- Quote from: DeafBug on July 04, 2003, 08:06:11 pm --- I went over to Oscars and I can't find the price or part list for the mounting plate to order. I did find this template --- End quote --- Ahh! Found it. Thanks. You actually have to shop to see it! Any way to plug the extra holes as I only want it for the mspacman/galaxia joystick. Or are they not a factor? It is on the price and ordering info page. Scroll down about half way and it says "Joystick Mounting Plate". You have the option of Black Dimpled, primer or blank. Price of $15. Can't miss it. Good luck. J_K_M_A_N --- End quote --- |
| Navigation |
| Message Index |
| Previous page |