Hi, im new and i have a huge queston

[briansltts]

i have a simpsons arcade game made by konami. everything on the game works except the 4 player buttons are not wired! there is no wiring left in the thing to see where it could runi've looked and looked for a place that i could run the wires to, but found nothing.

there is one spot by the coin drawer where it looks like a harness could connect in, but im not so sure it is for that.

please let  me know what i would need to wire or buy to get this game opperational

[BobA]

Here is a link to the manual for the simpsons arcade game.  The game is a Jamma+ game which means that it uses a standard Jamma connector to connect players 1 and 2 and it uses harnesses that connect directly to the mother board for players 3 and 4.   All the wiring details are in the manual.

PS you question is posted in the wrong place.   The main forum might get a better response.

Hope that helps.   


http://www.basementarcade.com/arcade/library/manuals/s/simpsons.pdf

[briansltts]

haha whoops    so is this the kind of harness i will need?

http://jammaboards.com/store/konami-jamma-3rd-/-4th-extra-player-harness/prod_126.html

[BobA]

Looks like what you need.