Main > Lightguns

Cost of a light gun set-up?

<< < (2/2)

JayB:

--- Quote from: DJ_Izumi on April 15, 2009, 07:57:22 pm ---If you're using S-Video, the Guncon2 is probably your cheapest bet and there are drivers for'em.  IN that situation, you'd meerly need to split the S-video into a composite adaptor and let that go into the Guncon's video jacks.  Guncons go for $10-$20 used.

--- End quote ---

I have a Guncon limited edition from years back but, it has PS One connector and a couple of rca jacks. Would that be possible to get it setup somehow?

I also have the proper Red/Blue Happ guns that came with my machine although are not connected right now. Any luck with these running under Mame with a TV screen?

CheffoJeffo:

--- Quote from: Equinox on April 17, 2009, 06:12:41 pm ---I also have the proper Red/Blue Happ guns that came with my machine although are not connected right now. Any luck with these running under Mame with a TV screen?

--- End quote ---

Not yet, but this could be promising.

Haven't heard anything in a while though.

BobA:
2 act lab interfaces and 2 guns about $180.   Interfaces depend on TV CRT or VGA monitor choice.

DJ_Izumi:

--- Quote from: Equinox on April 17, 2009, 06:12:41 pm ---I have a Guncon limited edition from years back but, it has PS One connector and a couple of rca jacks. Would that be possible to get it setup somehow?

I also have the proper Red/Blue Happ guns that came with my machine although are not connected right now. Any luck with these running under Mame with a TV screen?
--- End quote ---

:O  Do you mean the LE Elemental Gearbolt gold plated Guncon that only 50 were ever produced and only 3 known copies exist?

Cause if so, that's worth a BIT of money and you might not wanna be up and jury rigging it to an arcade rig.  That's the only LE Guncon I know of. :)

Anyway, no, to my knowledge there is no adaptor or driver for the Guncon 1 to make it work on a PC, not that you probably couldn't build one, it'd be a LOT of work.  The Guncon 2 for PS2 on the other hand is already USB based so they only needed to make a PC driver for it and voila.

Navigation

[0] Message Index

[*] Previous page