Arcade Collecting > Restorations & repair
NPs Star Wars
Neverending Project:
The thing is I did check the interconnection board. I took all three boards out and removed both interconnect boards. THen I reconnected them and still got nothing. It wasn't until the second time that things started working. So I did listen to you. :)
The LED on the deflection board is not lit. Where do I check the HV on the monitor, is there a test point?
ChadTower:
--- Quote from: Neverending Project on April 29, 2009, 10:29:34 am ---The thing is I did check the interconnection board. I took all three boards out and removed both interconnect boards. THen I reconnected them and still got nothing. It wasn't until the second time that things started working. So I did listen to you. :)
The LED on the deflection board is not lit. Where do I check the HV on the monitor, is there a test point?
--- End quote ---
You turn off the lights and look at the neck... any orange glow? Can you hear it ticking? If no then no HV.
Level42:
Slide your tongue under the HV cu.....ahh no, Chad's suggestion is better.
Neverending Project:
Oh-bkay. I bused the b-toungue trick, and bnow my btongue is sor-buh. Whabt wibll mabke my-buh btongut feebl better?
Translation:
There is HV, as the neck glows and I hear ticking. What I meant to ask is where can I measure B+ so I can set it to 180 if it is too low?
Level42:
--- Quote from: Neverending Project on April 29, 2009, 11:06:17 am ---Oh-bkay. I bused the b-toungue trick, and bnow my btongue is sor-buh. Whabt wibll mabke my-buh btongut feebl better?
--- End quote ---
:laugh2: :laugh2: :laugh2: :laugh2:
Sounds like Jar-Jar at the podracer :D
Uhhh, I forgot.....have to check the manual for that.....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version