Author Topic: Controls for Mac OSX (Read 1165 times)

Jawknee7o7 · « **on:** March 04, 2009, 02:22:59 pm »

i am wanting to build a mame machine. i have an old Mac Mini that i was just going to use and put MacMame on it. i have a 34" Dynamo showcase arcade cabinet, with MVC2 on the Naomi system with a Capcom I/O board. i would like to use the existing wiring to connect to my Mac Mini, but how do i go about doing that, getting the Jamma harness to go to USB for my Mac to read?, can i go from theUSB conection from the Capcom I/O board to my Mac and get a driver for it to be recognized? thanks for the help is advance

billpa · « **Reply #1 on:** March 04, 2009, 02:27:19 pm »

Check out Ultimarc's Jpac. http://ultimarc.com/jpac.html

That way you keep your jamma wiring but still interface with your mac mini.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Controls for Mac OSX (Read 1165 times)

Jawknee7o7

Controls for Mac OSX

billpa

Re: Controls for Mac OSX