Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Removing laminate...  (Read 1131 times)

0 Members and 1 Guest are viewing this topic.

Lucky S.O.B.

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 92
  • Last login:June 02, 2021, 03:02:50 pm
  • Mmmmm.... Donuts!
Removing laminate...
« on: June 23, 2003, 06:28:19 pm »
I have a dynamo cabinet that has the Red and Grey laminate that is chipped/Dirty and in general falling apart. My question to everyone is:

How difficult would it be to remove the laminate?
Is there any tricks to do this?

Or should I just laminate over the old stuff?

-D
Logged

Brax

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1426
  • Last login:January 06, 2009, 09:03:48 am
  • Bring on the power tools!
Re:Removing laminate...
« Reply #1 on: June 23, 2003, 06:40:14 pm »
Get a putty knife under it and it will come up surprisingly easy. If you need some help, apply heat from a hairdryer. Remove the glue gunk from the MDF before you reapply your laminate.
Logged
If you build a frankenpanel, chances are I don't care for you as a person.

SNAAAKE

  • -Banned-
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3147
  • Last login:July 21, 2004, 03:44:18 am
  • Banned for abusive postings.
Re:Removing laminate...
« Reply #2 on: June 23, 2003, 06:59:24 pm »
chisel+hammer works too !  :P
Logged

rampy

  • *shrug*
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2910
  • Last login:March 02, 2007, 11:32:16 am
  • ...as useless as a JPG is to Helen Keller
    • Build Your Own PVR
Re:Removing laminate...
« Reply #3 on: June 23, 2003, 07:42:30 pm »
I used a putty knife and a hammer (i've got pics / description in my Diary of a Madman  on my site) and elbow grease.

A heat gun or a hair dryer woulda  worked/helped...

There are probably solvents that you could use to loosen up the glue, but I wouldn't recommend that approach.

Rampy
Logged

AlanS17

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5382
  • Last login:December 02, 2019, 08:35:48 am
  • I won't even pretend to be clever...
    • AlanS17
Re:Removing laminate...
« Reply #4 on: June 23, 2003, 10:29:55 pm »
paint scraper/hammer worked for me. if it's loose to begin with you can reach under it and start pealing it up.
Logged

Lucky S.O.B.

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 92
  • Last login:June 02, 2021, 03:02:50 pm
  • Mmmmm.... Donuts!
Re:Removing laminate...
« Reply #5 on: June 24, 2003, 02:02:04 am »
Thanks everyone for the info.

I guess I have a fun weekend coming up. Laminate removing party!
Logged
Pages: [1]
  
Go Up
« previous next »