Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: P3 & P4 not working on IPAC4  (Read 1080 times)

0 Members and 1 Guest are viewing this topic.

shmokes

  • Just think of all the suffering in this world that could have been avoided had I just been a little better informed. :)
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10397
  • Last login:September 24, 2016, 06:50:42 pm
  • Don't tread on me.
    • Jake Moses
P3 & P4 not working on IPAC4
« on: January 06, 2009, 03:39:59 pm »
I have an old IPAC 4 that's never been used before now.  I just wired it up and everything seems to work perfectly except the P3 and P4 joysticks.  None of the directions register for either joystick.  Not in games, not in Notepad, not in the WinIPAC utility.  I've got continuity on all the wires/grounds.  And I don't see any jumpers to select between 2p and 4p on the board.  Any idea what the problem might be?  I emailed Andy like five minutes ago, but I'm impatient.   ;D
Check out my website for in-depth reviews of children's books, games, and educational apps for the iPad:

Best Kid iPad Apps

ahofle

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4544
  • Last login:August 30, 2023, 05:10:22 pm
    • Arcade Ambience Project
Re: P3 & P4 not working on IPAC4
« Reply #1 on: January 06, 2009, 04:48:46 pm »
Do the P3 and P4 buttons all work? 
My first suspicion would be a ground issue on the joysticks, although you said you checked that...

whammoed

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2310
  • Last login:July 29, 2025, 11:05:33 am
  • Crack don't smoke itself
    • NiceMite
Re: P3 & P4 not working on IPAC4
« Reply #2 on: January 06, 2009, 10:05:11 pm »
I have an issue with my IPAC4 where player 3 and 4 do not work occasionally.  Unplugging the ipac from the pc and plugging it back in solves the issue.  I have the older version too.  Could be the same for you or a wiring issue.  Hasn't been frequent enough yet to send it back to Andy to look at.  Trying unplugging/plugging and see what happens.