| Main > Main Forum |
| I know this was asked by someone, but I can't find it |
| << < (3/3) |
| paigeoliver:
Eh, any switching solution you devise would have to either provide a load on the arcade power supply, or turn it off when you are running mame. Those switchers will go up in smoke real quick if you run them with no load. I say just pack up yr Jamma board all nice and protected inside, and run it in Mame instead, you may want to have yr frontend default to that game upon bootup. |
| Pyronious:
--- Quote from: rampy on June 18, 2003, 05:32:45 pm ---Is marvel vs. Capcom 2 emulated in mame? --- End quote --- Marvel vs. Capcom 2 is not emulated in MAME, and is unlikely to be emulated any time soon, as the hardware (Sega Naomi) is a heavy-duty polygon pushing (3D) machine. To do what you want to do, you will need a JPAC and ArcadeVGA to connect your PC to the JAMMA cabinet. Then you will need a MultiJAMMA, available from: http://www.multigame.com/jamma.html Have fun! |
| Navigation |
| Message Index |
| Previous page |