Main > Project Announcements
2 Projects...1 Bartop & 1 Pinball Countertop
punxrus:
So I keep forgetting about the pics...but the bartop cabinet is coming out pretty nice. Bondo did work really well in fixing the damaged corner. Thanks for the help on that one HarumaN! I'm still trying to figure out how to layout the control panel. I'm going to have a single joystick, six player buttons and a single start button...or would I need anything else...time will only tell... :dunno
Also, I'm not sure where I got the plans for this arcade, but from whoever I got them from, thank you! After the sanding is done, I'll primer it up and get some paint on there! Probably just plain boring black for now...but we'll see!
leapinlew:
I built a 1/2" bartop out of MDF and I used T-molding. You definitely want to do T-molding with MDF. You don't want to see your beautiful work get dinged up.
If you click My Projects in my signature - it's the bartop Galaga machine. I used the 1/2" T-molding from t-molding.com. Good luck!
punxrus:
Problem is I have some bondo on the corner that was damaged from the fall. How would I get that cut to get the T-molding in there? I would imagine that wouldn't work out so well... :-\
leapinlew:
--- Quote from: punxrus on September 11, 2008, 06:53:38 pm ---Problem is I have some bondo on the corner that was damaged from the fall. How would I get that cut to get the T-molding in there? I would imagine that wouldn't work out so well... :-\
--- End quote ---
That bondo holds t-mold just fine.
punxrus:
--- Quote from: leapinlew on September 11, 2008, 07:11:34 pm ---
--- Quote from: punxrus on September 11, 2008, 06:53:38 pm ---Problem is I have some bondo on the corner that was damaged from the fall. How would I get that cut to get the T-molding in there? I would imagine that wouldn't work out so well... :-\
--- End quote ---
That bondo holds t-mold just fine.
--- End quote ---
I guess if all else fails...more bondo!!! ;D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version