Main > Main Forum
Help with painting issues
str1der:
I've been working on my cabinet made with 3/4" MDF and I'm using Rustoleum Hammer finish paint on it. I've been using a 6 " sponge roller. I've put three coats on the sides but I can't get rid of roller marks. Is there any tricks or words of wisdom to get rid of them?
Hoagie_one:
two ideas.
1) make sure you give it a light sanding between coats. Each time with a finer grit.
2) dont roll in straight lines. Go across, then down then side, then across then get the spots you missed. Hard to explain but i saw it on trading spaces, lol
u_rebelscum:
You also need a high quality roller. Not sure if your sponge roller is "high enough" quality. I can't tell the difference between medium and high quality; I ask the hardware clerk to show me the which ones are the best. *shrug* Maybe someone here can me (us) on this?
str1der:
I used what they said were high quality rollers. Am I using to much pressure when painting possibly?
Sprucemoose:
Its possible. A little paint goes a long way. After you are done with a side look at the glare and see if you see any roller marks, if roll them out like Hoagie suggested.