Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Oscar Restrictor Plate Question  (Read 2422 times)

0 Members and 1 Guest are viewing this topic.

Mike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 307
  • Last login:September 22, 2005, 01:22:14 pm
  • Umm, yea about the TPS report
Oscar Restrictor Plate Question
« on: March 14, 2002, 01:30:28 pm »
Anyone know how far over the base of a happs super the oscar restrictor plate extends? It looks like if I have the measurements right it extends over the sides by about .42 inches and over the top and bottom by 1.2". Can anyone confirm this for me. My control panel is very small and I just want to make sure I can mount this before ordering one.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Logged

delta88

  • I didn't try to trick anyone - Fair warning was given
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 657
  • Last login:May 20, 2025, 08:21:05 am
  • This place is still here?
Re: Oscar Restrictor Plate Question
« Reply #1 on: March 14, 2002, 02:00:26 pm »
why not ask the man who built them...kelsy ....
http://www.oscarcontrols.com
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Logged

OSCAR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:September 06, 2018, 11:31:53 pm
  • I think Bigfoot is blurry, that's the problem...
    • Oscar Controls
Re: Oscar Restrictor Plate Question
« Reply #2 on: March 14, 2002, 08:03:45 pm »
Quote
Anyone know how far over the base of a happs super the oscar restrictor plate extends? It looks like if I have the measurements right it extends over the sides by about .42 inches and over the top and bottom by 1.2". Can anyone confirm this for me. My control panel is very small and I just want to make sure I can mount this before ordering one.



Your measurements are correct.  There is also a PDF template you can print out on the website (www.oscarcontrols.com) that may help with planning your control panel layout.  Please let me know if you have any questions.


--OSCAR

« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Logged

Tiger-Heli

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5447
  • Last login:January 03, 2018, 02:19:23 pm
  • Ron Howard? . . . er, I mean . . . Run, Coward!!!
    • Tiger-Heli
Re: Oscar Restrictor Plate Question
« Reply #3 on: March 15, 2002, 08:45:39 pm »
Quote
Anyone know how far over the base of a happs super the oscar restrictor plate extends? It looks like if I have the measurements right it extends over the sides by about .42 inches and over the top and bottom by 1.2". Can anyone confirm this for me. My control panel is very small and I just want to make sure I can mount this before ordering one.


I am also planning a small CP with the OSCAR restrictors.  An option I plan to use is to cut 0.75 inch off the top and bottom of the mounting plate (including the holes).  The I will not cut the rectanglar hole in the CP, but will use the joystick bolts to hold the restrictor in place.  I plan to use 3/8" plywood for the panel top, but if yours is thicker, you would have to router it out to use this method.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Logged
It's not what you take when you leave this world behind you, it's what you leave behind you when you go. - R. Travis.
When all is said and done, generally much more is SAID than DONE.
Pages: [1]
  
Go Up
« previous next »