Arcade Collecting > Restorations & repair

Please identify this sit-down racer ? => It's a Konami GT cockpit !

<< < (7/9) > >>

Level42:
1) There she goes...

2) Before

3) After

(Didn't actualy wash the PCB with the ribbon bands on it. These are on the lower PCB, and this was only dusty on the solder side, so I cleaned off the dust and cleaned the ribbons and connectors with some paper towel and my trusty "Dasty".

Level42:
That's better :)

Level42:
There's a separate small PCB at a connector on the upper PCB, which clearly interfaces the controls. There's a connector for steer, accelerate/brake (?). These are soldered to a single connector. There's also a third with the indication "action seat" Now that might be interesting :P

Gotta get that Jamma adapter from the cab (forgot it  :banghead:) so I can test it in my Mame cab...at least if the PCB runs....you never know :P

Level42:
Isn't the internet great :D

http://www.jammaboards.com/guides/Konami%20GT.txt

(Mainly put here for my own archiving  :P)

Strange that the brake pot is also wired up when there is only a accelerate pedal....

arcadefever:
have test the pcb on your other cab ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page