Hi Arzoo,
Great program you've got there in LEDBlinky :-)
I've got a few problems and errors using it. I'm just preparing for my cabinet, and I've got two single LED's connected to my LEDWiz. One on port 16, and the other on port 32.
I've set up the input map as follows: P1B1 = port 16 KEYCODE_LCTRL, P1B2 = port 32 KEYCODE_LALT
I've also setup the mala and mame profiles accordingly, and left everything at default settings
First strange thing is that the test buttons don't seem to work in the Mame profile setup? No matter how hard I try, the test buttons will not light any LED's.
If I set LEDBlinky to light mala and mame controls, it lights the LEDs within mala no problem (animations work as well). But not within mame. So LEDBLinky is able to access and set my LEDWiz ok.
If I set LEDBlinky to just light mame controls, I get no LED's lit at all. I realised I hadn't setup the mame config directory in LEDBlinky, so set that to the Mame\cfg directory.
Now upon loading mala I get the following Exception:
Exception EInOutError in Modul LEDBlinky.mplugin bei 0006A901
and it crashes mala, and no LEDBlinky.log file is generated either?
If I remove the Mame\cfg from LEDBlinky I can load mala, but get no LED's in MAME.
I'm running Windows Vista 32-bit if that's relevant
Please help
Let me know of anything you want me to do or run in order to help you find the problem.
Thanks,
Glenn