Author Topic: Burgertime-from Rare to Well Done (Read 44454 times)

rikitiki · « **on:** May 07, 2007, 10:32:18 am »

This crappy

conversion I picked up looked familar
the price was right and needed a new project.

Jeff AMN · « **Reply #1 on:** May 07, 2007, 10:45:25 am »

Wow, it's going to take a lot of elbow grease...but this is one of those cabs that is DEFINITELY worth the effort. Burgertime is a very attractive cabinet. Just make sure that the sideart is easily visible when you're done. Don't sandwich it between two cabs.

theCoder · « **Reply #2 on:** May 07, 2007, 10:56:51 am »

Are you going to restore it, or Mame it?

horseboy · « **Reply #3 on:** May 07, 2007, 12:48:32 pm »

He will be restoring it I am sure. He is the guy behind thisoldgame.com. He will be selling the Burgertime stencils that he uses to fix this badboy up. If it comes out nice, which I think it will, he definitely has a customer in me.

rikitiki · « **Reply #4 on:** May 07, 2007, 01:08:51 pm »

Yes full on Arcade restoration. This wont be your typical restore /build blog
most of the reproductions I'll produce for this restartion will be avalibal at
www.ThisOldGame.com
I needed something with a challenge. and this was just the meal to fill the bill.
was such a nice piece orginally-Lets paint it Black and convert it!

I'll be showing alot of screenprinting process in the restoration
as well as all the stenciling work from the cut to the applications.
Hoping to shed a little more light on the mysterys that is Screenprinting

Gutted the cabinet completly
now for the stripping...

rikitiki · « **Reply #5 on:** May 07, 2007, 01:11:20 pm »

No saving this as-is so the artwork has been redrawn, sized, and vectorized.
Then film positives are made for each color to be printed. the first color in this case will be white. Pic showing the film postive aligment on where it will be placed and screened
on a vinyl overlay

rikitiki · « **Reply #6 on:** May 07, 2007, 01:16:49 pm »

The image is set the screen is place and the white is ready for printing.

rikitiki · « **Reply #7 on:** May 07, 2007, 01:22:03 pm »

each indiviaual color is alignd and printed one at a time after the previous color has been dryed, new screens made for the next color, red
and the same is done for the orange.

rikitiki · « **Reply #8 on:** May 07, 2007, 01:26:13 pm »

Each color printed is also slightly enlarged or outlined to provide "Trap"
the final color usally Black that holds all the detail
should hide all the points where the colors overlap

FYI: If youve ever noticed original or even NOS parts sometimes have colors slightly off in alignment from the black this is from restration betweeen color prints and or not allowing enough of "trap" to be hidden behind.

rikitiki · « **Reply #9 on:** May 07, 2007, 01:28:07 pm »

and finally the moment of truth
months of work boil down to this critical moment
the final color. checking the wind resistance...
planet aligment...take a deep breath...

Level42 · « **Reply #10 on:** May 07, 2007, 01:45:51 pm »

Quote from: horseboy on May 07, 2007, 12:48:32 pm

He will be restoring it I am sure. He is the guy behind thisoldgame.com. He will be selling the Burgertime stencils that he uses to fix this badboy up. If it comes out nice, which I think it will, he definitely has a customer in me.

Yep, and I can tell you now that the quality will be excellent. Check out how his Galaxian CPO turned out at:

http://forum.arcadecontrols.com/index.php?topic=62784.120

Aurich · « **Reply #11 on:** May 07, 2007, 02:48:04 pm »

Sweet. Great game, great cab, and great breakdown of the screen-printing process. Can't wait to see the final beast.

rikitiki · « **Reply #12 on:** May 08, 2007, 09:49:54 am »

Quote from: theCoder on May 07, 2007, 10:56:51 am

Are you going to restore it, or Mame it?

This poor thing has been through enough abuse.

rikitiki · « **Reply #13 on:** May 08, 2007, 09:53:48 am »

Finished product
Next up...The Install!

theCoder · « **Reply #14 on:** May 08, 2007, 10:04:14 am »

Quote from: rikitiki on May 08, 2007, 09:53:48 am

Finished product
Next up...The Install!

That looks awesome. That is a very nice skill to have. I take it it is easier to print to vinyl then apply, than to register/print straight to the cab? I'm coming up on installing some side art on my driving cab, and am looking forward to learning from your description / tricks of the trade when it comes to the installation.

javeryh · « **Reply #15 on:** May 08, 2007, 10:47:17 am »

Quote from: rikitiki on May 08, 2007, 09:53:48 am

Finished product
Next up...The Install!

Amazing work.

rikitiki · « **Reply #16 on:** May 08, 2007, 01:39:18 pm »

Yes I couldve screened it directly to the cabinet
but felt there would be others in need of the vinyl
overlays which Ive got for sale www.ThisOldGame.com
the same will be for the stencils and CPOs as well
Next I will be showing some tips and tricks of the trade on the installtion
So you dont end up with something like this guy did

melarky · « **Reply #17 on:** May 08, 2007, 01:54:27 pm »

Quote from: rikitiki on May 08, 2007, 01:39:18 pm

Yes I couldve screened it directly to the cabinet
but felt there would be others in need of the vinyl
overlays which Ive got for sale www.ThisOldGame.com
the same will be for the stencils and CPOs as well
Next I will be showing some tips and tricks of the trade on the installtion
So you dont end up with something like this guy did

Ha, that cab looks "noice".

melarky · « **Reply #18 on:** May 08, 2007, 01:56:21 pm »

I'm interested in this process, if you were to do it right on the cab, would the process be different? Would you use different paint/ink (not sure what you use now). Does the surface you are screen printing have to be prepped in some way? Does it matter if it's super smooth, or can it be slightly textured (like a finish that is rolled on with a foam roller, it's not really really bad, but it's not sprayed on smooth either).

rikitiki · « **Reply #19 on:** May 08, 2007, 03:53:32 pm »

not a whole lot of differerance. the screen lays and secures to the cabinet surface
inks would be diferent
if its a painted wood surface-Enamel screen ink (a smooth painted surface is best)
otherwise the ink when screened will tend to leak out and the edges wont be as sharp.
some cabinets had vinyl overlays. Ataris, Galaxian, etc. those would take
a vinyl solvent ink to screen on top of that

My next project- Pacman will have this process of screening directly to the Cabinet.
which Ill post those steps as well when I get that project rolling

Level42 · « **Reply #20 on:** May 08, 2007, 04:38:46 pm »

Hey Rich,

I love Burgertime and will follow this thread closely !

IMHO silk screening will beat inkjet printing anytime on this kind of work. The only time when I'd use (buy) inkjet is for a "one off" marquee.

Rich, small "reminder".....(we already mailed about this):
Since you are also making the metal CPO's for Space Invaders etc. would it also be possible to make the midway metal Coin door plates ?
And while we're at it: My dear Galaxian is also missing the manufacturer's plate on the back (Namco/Bally). It's very simple "B/W" and also on metal

I mean this one:

SodaPopinksi · « **Reply #21 on:** May 08, 2007, 05:59:35 pm »

I honestly try to stay away from this game. It actually makes me hungry for a burger and french fries every time I play it. Not that that's a bad thing I guess, I usually make my own instead of getting fast food. But nice cabinet!!

melarky · « **Reply #22 on:** May 08, 2007, 06:17:28 pm »

Quote from: Level42 on May 08, 2007, 04:38:46 pm

Hey Rich,

I love Burgertime and will follow this thread closely !

IMHO silk screening will beat inkjet printing anytime on this kind of work. The only time when I'd use (buy) inkjet is for a "one off" marquee.

Rich, small "reminder".....(we already mailed about this):
Since you are also making the metal CPO's for Space Invaders etc. would it also be possible to make the midway metal Coin door plates ?
And while we're at it: My dear Galaxian is also missing the manufacturer's plate on the back (Namco/Bally). It's very simple "B/W" and also on metal

I mean this one:

I saw this tutorial on copper plating and etching altoid tins:

http://steampunkworkshop.com/altoid-etch.shtml

Could be used to make a cool little plate (ditch the copper plating part). I'm sure it applies to more than just altoid tins too...

Level42 · « **Reply #23 on:** May 09, 2007, 03:27:35 am »

Interesting, but I'm pretty sure the original was simply silk-screen printed just like the Space Invaders CPO's on the metal. Since it's tiny and only requires one color (black), it should be "a breeze" to make (for guys that can do silk-screen printing, like Rich).

SirPeale · « **Reply #24 on:** May 09, 2007, 09:36:14 am »

Quote from: Level42 on May 09, 2007, 03:27:35 am

Interesting, but I'm pretty sure the original was simply silk-screen printed just like the Space Invaders CPO's on the metal. Since it's tiny and only requires one color (black), it should be "a breeze" to make (for guys that can do silk-screen printing, like Rich).

I think it's anodized aluminum. My reason for this belief is that it doesn't come off with paint remover. If it were just paint it would slough right off.

rikitiki · « **Reply #25 on:** May 09, 2007, 10:41:55 am »

Im on it!
I use anodized aluminum and enamel baked inks for the Space Invaders and Gorf Cpos and have lots of smaller drop pieces that would be perfect for these plates
easy 1 color print will probably need a similar one for this BT project as it was missing and my Pacman was painted over

Level42 · « **Reply #26 on:** May 10, 2007, 05:31:13 pm »

Great to hear Rich !!!

rikitiki · « **Reply #27 on:** May 14, 2007, 03:46:50 pm »

ok the cabiet front is sanded, filled and ready for install.

rikitiki · « **Reply #28 on:** May 14, 2007, 03:55:31 pm »

These steps work for just about any and all front or side vinyl art applications
LIst of things Needed
1-Patience
2-Naptha (great multi-purpose cleaner removes oils, old adhesives, goo, etc.dosnt leave a residue and evaporates fast))
3-A 50/50 mix of water and Alcohol (the rubbing kind not the drinking kind) with a squit of hand soap
DONT USE WINDEX!-windex or other cleaners that contain amonia are bad.

4-squeegee (I provide these with all my art @ thisoldgame.com)
Now lets get started...

rikitiki · « **Reply #29 on:** May 15, 2007, 11:22:06 am »

when ever possible lay the cabinet down gravity works wonders
This kickplate art is overzed about a 1/4" all the way around which will make for a better fit when finsihed.
-lay the art face down and remove the backing.
-spray the adhesive side with e 50/50 mix
-Flip decal over and move it into posistion

rikitiki · « **Reply #30 on:** May 15, 2007, 11:33:53 am »

-using the squueggee press and push excess water and air out
-trim out coindor with an exacto (dosnt have to be perfect coin door fram will cover it up
-trim sides use a NEW blade here you want a nice clean cut the blade tip will fall right into the corner and act as a cutting guide.
-again using the squeeege press decal on the edge sides just trimmed
pushing any remaing excess water out.
-next the hardest step of all-WAITING... untill dry

melarky · « **Reply #31 on:** May 15, 2007, 01:30:58 pm »

I'm loving your details installation guide, keep it coming! Nice to hear an experts take on it.

rikitiki · « **Reply #32 on:** May 25, 2007, 09:56:55 am »

Thanks, Once the decal is dry, you can peel off the premask it can be srayed with your 50/50 mix to make it a little easier you dont want to lift the decal creating air bubbles and other problems. and if all goes well you end up with something like this.
Will add the coin door back once its been reworked

rikitiki · « **Reply #33 on:** May 25, 2007, 10:00:27 am »

Chapter 2: SIDE ART STENCILING 101
Unforntunaly the side art was unsaveable.

rikitiki · « **Reply #34 on:** May 25, 2007, 11:09:24 am »

Sanded down and ready fro prime and paint
Match color to a spot behind the MFG plate on Back of the cab underneath was the orginal Orange "mustard" color that didnt get painted over

Matched to an enamel Satin Finsh-Behr "Yam" 290B-7 (D)

leapinlew · « **Reply #35 on:** May 28, 2007, 01:04:32 pm »

Quote from: rikitiki on May 25, 2007, 11:09:24 am

Sanded down

The way you say it - it sounds easy...

This was one of the more demanding/patience required jobs that I did with any of my cabs. Good work!

bfauska · « **Reply #36 on:** May 28, 2007, 03:07:15 pm »

I hope for the sake of your arms that the sander you used wears a belt. I've had to remove the finish from a panel about that size before and while it took a gentle touch with the belt sander, I couldn't imagine doing it with just a random orbit or other palm sander. The kick panel art looks great, I can't wait to see the sides. I probably don't have any use for the screening info, but I admire anybody who can so clearly share a process with others so that they may sometime be able to do it themselves. Thank you, and keep up the great work.

audiomidiman · « **Reply #37 on:** May 29, 2007, 11:01:11 am »

Quote from: Level42 on May 08, 2007, 04:38:46 pm

Hey Rich,

I love Burgertime and will follow this thread closely !

IMHO silk screening will beat inkjet printing anytime on this kind of work. The only time when I'd use (buy) inkjet is for a "one off" marquee.

Rich, small "reminder".....(we already mailed about this):
Since you are also making the metal CPO's for Space Invaders etc. would it also be possible to make the midway metal Coin door plates ?
And while we're at it: My dear Galaxian is also missing the manufacturer's plate on the back (Namco/Bally). It's very simple "B/W" and also on metal

I mean this one:

I believe you looking for the coin door plates? If so, arcadeshop carries about 2-3 different Midway coin door plates.

http://arcadeshop.com/pics/midway-logo-plate1.jpg
http://arcadeshop.com/pics/midway-logo-plate.jpg
http://arcadeshop.com/pics/midway-logo-plate3.jpg

The quality is very nice. Rich can make them I'm sure, but they are already available.

Bill

horseboy · « **Reply #38 on:** May 30, 2007, 08:04:49 am »

Quote from: audiomidiman on May 29, 2007, 11:01:11 am

Quote from: Level42 on May 08, 2007, 04:38:46 pm
Hey Rich,

I love Burgertime and will follow this thread closely !

IMHO silk screening will beat inkjet printing anytime on this kind of work. The only time when I'd use (buy) inkjet is for a "one off" marquee.

Rich, small "reminder".....(we already mailed about this):
Since you are also making the metal CPO's for Space Invaders etc. would it also be possible to make the midway metal Coin door plates ?
And while we're at it: My dear Galaxian is also missing the manufacturer's plate on the back (Namco/Bally). It's very simple "B/W" and also on metal

I mean this one:

I believe you looking for the coin door plates? If so, arcadeshop carries about 2-3 different Midway coin door plates.

http://arcadeshop.com/pics/midway-logo-plate1.jpg
http://arcadeshop.com/pics/midway-logo-plate.jpg
http://arcadeshop.com/pics/midway-logo-plate3.jpg

The quality is very nice. Rich can make them I'm sure, but they are already available.

Bill

Nope. The plate he is looking for is the Manufacturer ID plate that goes on the back of the cab.

rikitiki · « **Reply #39 on:** May 30, 2007, 01:23:35 pm »

Quote from: bfauska on May 28, 2007, 03:07:15 pm

I hope for the sake of your arms that the sander you used wears a belt. I've had to remove the finish from a panel about that size before and while it took a gentle touch with the belt sander, I couldn't imagine doing it with just a random orbit or other palm sander. The kick panel art looks great, I can't wait to see the sides. I probably don't have any use for the screening info, but I admire anybody who can so clearly share a process with others so that they may sometime be able to do it themselves. Thank you, and keep up the great work.

Thanks much hard work is true and after the bulk of hard sanding its all in the hand.
I thought I mainly put the screening up there just to show how much differet it really is over inkjets, you be suprized how many people, just dont get it. and Hope some will learned a littitle somethin along da way.

rikitiki · « **Reply #40 on:** May 30, 2007, 01:25:51 pm »

I'll have those MFG aluminum plates up on my site later in the week
the arts vectorized and the materials cut, just need to squeeze in some screen time.
so keep checking back in at the site they will be on the home page when ready
GAME ON!

Level42 · « **Reply #41 on:** June 02, 2007, 05:04:34 am »

Thanks for your reply Audiomidiman, but two things:
1) As horseboy already mentioned, indeed in the first place I'm looking for that manufacturer's back plate.
2) About the coin door plates: I actualy already have one from www.arcadeshop.com and it's on my machine now. It's ok, quality is ok, but there are some things that could be better. I mentioned this in my Galaxian No.815 thread. Check it out here: http://forum.arcadecontrols.com/index.php?topic=62784.msg656196#msg656196

Since I've got my CPO from Rich, I am 100% convinced of the quality he makes. Since he's doing silk screening VERY precisely and also does it on REAL metal, I'm pretty sure the plates will turn out great.

We've discussed doing the coin door plates as well. I hope Rich will manage to squeeze these into his program as well

Rich, great news about the plates !!!

csa3d · « **Reply #42 on:** June 13, 2007, 12:58:49 am »

Quote from: Level42 on June 02, 2007, 05:04:34 am

Since I've got my CPO from Rich, I am 100% convinced of the quality he makes. Since he's doing silk screening VERY precisely and also does it on REAL metal, I'm pretty sure the plates will turn out great.

We've discussed doing the coin door plates as well. I hope Rich will manage to squeeze these into his program as well

Rich, great news about the plates !!!

I still haven't ordered mine yet, and would much prefer one on metal as well. If you make one, mind as well go for two! Let me know and I'm in.

-csa

Level42 · « **Reply #43 on:** June 13, 2007, 06:30:46 pm »

Mmmm, no news on thisoldgame.com yet... any updates Rich ? (Not trying to stress you, just curious

)

rikitiki · « **Reply #44 on:** June 14, 2007, 02:47:47 pm »

Too Many probjects, too little time

Just about finsihed with these will have readdy to ship and completly pics early next week.

Neilyboy · « **Reply #45 on:** June 14, 2007, 04:02:35 pm »

Im also in for a midway 'video is our game' plate if you ever get enough time to work one of these out. Its all im missing to restore my coin-door and your work is beautiful!!

Neil

treborlicec · « **Reply #46 on:** June 15, 2007, 01:52:37 pm »

How bout some progress on the Burgertime Rich? I just picked mine up last week. It will need a CPO, but the art is in great shape otherwise. I'm looking forward to seeing how your stencil job turns out.

Later,
Robert

Level42 · « **Reply #47 on:** June 17, 2007, 01:39:42 pm »

Quote from: rikitiki on June 14, 2007, 02:47:47 pm

Too Many probjects, too little time
Just about finsihed with these will have readdy to ship and completly pics early next week.

Wow that looks really good !! How are these mounted, looks like blind bolts with a round head ?

BrentRadio · « **Reply #48 on:** June 17, 2007, 02:33:58 pm »

"Video is our game" plates

You can get these at Arcadeshop.com

http://www.arcadeshop.com/pics/midway-logo-plate1.jpg

Brent

Level42 · « **Reply #49 on:** June 18, 2007, 03:29:17 pm »

Quote from: BrentRadio on June 17, 2007, 02:33:58 pm

"Video is our game" plates

You can get these at Arcadeshop.com

http://www.arcadeshop.com/pics/midway-logo-plate1.jpg

Brent

Hey Brent,

You might want to read posting #41 on this thread.....

rikitiki · « **Reply #50 on:** June 19, 2007, 11:16:40 am »

Quote from: Level42 on June 17, 2007, 01:39:42 pm

Quote from: rikitiki on June 14, 2007, 02:47:47 pm
Too Many probjects, too little time
Just about finsihed with these will have readdy to ship and completly pics early next week.
Wow that looks really good !! How are these mounted, looks like blind bolts with a round head ?

Ill include the rounded finsh nails with these plates to make things easy.

Level42 · « **Reply #51 on:** June 19, 2007, 05:32:44 pm »

Quote from: rikitiki on June 19, 2007, 11:16:40 am

Quote from: Level42 on June 17, 2007, 01:39:42 pm
Quote from: rikitiki on June 14, 2007, 02:47:47 pm
Too Many probjects, too little time
Just about finsihed with these will have readdy to ship and completly pics early next week.
Wow that looks really good !! How are these mounted, looks like blind bolts with a round head ?
Ill include the rounded finsh nails with these plates to make things easy.

Rich, can you put me up for serialnr.1 ?

Cosider this a definite order

Zeno · « **Reply #52 on:** June 22, 2007, 08:08:52 pm »

Well... my wife just discovered Burgertime and is now hooked. Bust-a-Move just dropped down to #2 on her list.

Anyway, how rare is it to find an old Burgertime cabinet to restore? I have been to a lot of places selling old cabinets and have never come across one. I would love to bring one of these back to it's original condition.

treborlicec · « **Reply #53 on:** June 24, 2007, 02:33:41 pm »

They aren't terribly common, although I couldn't give exact production numbers.

Robert

WunderCade · « **Reply #54 on:** June 24, 2007, 05:52:45 pm »

Quote from: Zeno on June 22, 2007, 08:08:52 pm

Well... my wife just discovered Burgertime and is now hooked. Bust-a-Move just dropped down to #2 on her list.

Anyway, how rare is it to find an old Burgertime cabinet to restore? I have been to a lot of places selling old cabinets and have never come across one. I would love to bring one of these back to it's original condition.

Ebay and craigslist. I have only seen a couple here and there in the last 5 or so years. People usually don't part with them.

rikitiki · « **Reply #55 on:** June 24, 2007, 07:29:52 pm »

at around 22,000 (midway version)
hard to say how many are still out there

this one was a converted game and seller wasnt aware of its orginal orgins
but the cabinet shape gave it away.
Havnt seen many since. even the working boardsets are hard to come by
I could post up some cabinet dementions for this one
and even provide cnc router files if youd like a build project.

Zeno · « **Reply #56 on:** June 24, 2007, 08:41:47 pm »

Quote from: rikitiki on June 24, 2007, 07:29:52 pm

I could post up some cabinet dementions for this one
and even provide cnc router files if youd like a build project

Thanks, but I think this one is beyond my ability.

Your project looks great though. Here's to you...

Let's hope I can find a cab and use those stencils some day.

P.S. - how are you at the game? I cant get past L3. Damn, I need a level by level strategy.

zorg · « **Reply #57 on:** June 25, 2007, 07:42:32 am »

Quote from: rikitiki on June 24, 2007, 07:29:52 pm

I could post up some cabinet dementions for this one
and even provide cnc router files if youd like a build project.

please please provide the cnc files, I have a working board but miss the cab, and Burgertime is extremly rare and hard to find in europe

rikitiki · « **Reply #58 on:** June 25, 2007, 10:56:34 am »

Suggestions on where to post the cnc router files for all

zorg · « **Reply #59 on:** June 25, 2007, 11:37:46 am »

Quote from: rikitiki on June 25, 2007, 10:56:34 am

Suggestions on where to post the cnc router files for all

I can host them.

vectorlib have some plans availables, see Plans I can add the cnc file to the section, let me know

melarky · « **Reply #60 on:** June 25, 2007, 01:34:11 pm »

Yeah, I too would be interested in the CNC plans.

Level42 · « **Reply #61 on:** June 25, 2007, 03:21:01 pm »

Quote from: zorg on June 25, 2007, 07:42:32 am

Quote from: rikitiki on June 24, 2007, 07:29:52 pm
I could post up some cabinet dementions for this one
and even provide cnc router files if youd like a build project.

please please provide the cnc files, I have a working board but miss the cab, and Burgertime is extremly rare and hard to find in europe

Yeah, I played BT a LOT. I especialy went to a cinema (Luxor) in Rotterdam to play it. We had no arcades in the big cities in the 80s. I'm pretty sure that it was a generic cab and not the "real" one. I must have remembered it.

Looking at the cab, isn't this basicaly a Ms.Pac/Galaga with different sides ?
I'm not saying to destroy a Ms.Pac/Galaga but if you already got both of these, it would be a possibility to replace only the sides......

zorg · « **Reply #62 on:** June 26, 2007, 01:44:37 pm »

Quote from: Level42 on June 25, 2007, 03:21:01 pm

Looking at the cab, isn't this basicaly a Ms.Pac/Galaga with different sides ?
I'm not saying to destroy a Ms.Pac/Galaga but if you already got both of these, it would be a possibility to replace only the sides......

yes it's the same, and there's some people converting BT to Ms.Pac/Galaga using saw

anyway the problem still the same Ms.Pac and Galag are as rare as Burgertime, if I find one of the 3 here (but I suspect I will not

) I won't convert it, just restore it

saint · « **Reply #63 on:** June 26, 2007, 04:10:19 pm »

Glad to see Zorg hosting these

As an FYI though, anytime someone needs space to host BYOAC style projects, unless there are copyright concerns, the answer is most likely yes

I have tons of space and plenty of available bandwidth.

Cheers!

--- saint

Quote from: zorg on June 25, 2007, 11:37:46 am

Quote from: rikitiki on June 25, 2007, 10:56:34 am
Suggestions on where to post the cnc router files for all

I can host them.

vectorlib have some plans availables, see Plans I can add the cnc file to the section, let me know

Level42 · « **Reply #64 on:** July 03, 2007, 06:39:02 am »

Rich, we so need an update on the plate

Aquarius_Milo · « **Reply #65 on:** July 14, 2007, 05:30:55 pm »

wooahh great project xD a pro at work...

RayB · « **Reply #66 on:** July 16, 2007, 04:00:36 pm »

Rikitiki, is this your site?

http://www.thisoldgame.com/thisoldgame/new_page_2.htm

Level42 · « **Reply #67 on:** July 17, 2007, 11:21:51 am »

Hey Ray,

Try clicking on the little Globe on any of his messages................duh....

RayB · « **Reply #68 on:** July 20, 2007, 11:44:22 am »

Quote from: Level42 on July 17, 2007, 11:21:51 am

Hey Ray,

Try clicking on the little Globe on any of his messages................duh....

Well slap ---my bottom--- and call me... uhhh, never mind. RIKI, why isn't your site better known?

Although Prok is guilty of the same. Try remembering how to spell Olsezak!!

Level42 · « **Reply #69 on:** July 20, 2007, 01:11:59 pm »

WTF, you mean you didn't read a thing about my Galaxian No. 815 ??

You hurt me Ray.....you really hurt me......

I personaly listed thisoldgame.com on the Wiki, but I guess nobody looks there........sigh......

Did I mention the quality is fantastic ? Yeah I think I did somewhere....

Although he could update this thread a bit more.....

rikitiki · « **Reply #70 on:** July 21, 2007, 05:58:14 pm »

Hey guys sorry BT has been on the backburner for so long
Too many projects for just 1 mere mortal man.
new updated pics and progress coming soon.
and will upload the CNC router files shortly.
Also putting together a pdf file with measurements, assemblies and special cut notes.
Level42 this is for you
I still need to jig up for the drilling but they are basically screened and ready.

Level42 · « **Reply #71 on:** July 22, 2007, 02:54:13 am »

Yiha !!!!! And they look very very nice !!!!

treborlicec · « **Reply #72 on:** July 22, 2007, 02:17:45 pm »

Plate looks great. Anxiously awaiting BT progress pix.

Thanks,
Robert

zorg · « **Reply #73 on:** July 23, 2007, 02:18:40 am »

Quote from: rikitiki on July 21, 2007, 05:58:14 pm

and will upload the CNC router files shortly.
Also putting together a pdf file with measurements, assemblies and special cut notes.

nice to see this coming

zorg · « **Reply #74 on:** July 23, 2007, 12:15:17 pm »

A big Thank's to Rich.

burgertime CNC files available here burgertime.zip

archive contains the following (preview scaled down)

melarky · « **Reply #75 on:** July 23, 2007, 01:28:39 pm »

Thanks for the CNC files, I will have to try to cut a mini one when I get finished with my ms pac-man.

prOk · « **Reply #76 on:** July 23, 2007, 06:41:42 pm »

I too express thanks for the dxfs. Does anyone with a burgertime know if the parts were dadod together or was the cab assembled by blocks? If it's dado construction I want to adjust everything to take those into account if at all possible.

Thanks!
/brian

rikitiki · « **Reply #77 on:** July 24, 2007, 10:07:15 am »

good question
Im pretty sure its block and nails as there were several finish type nails that had been puttied over on the front and sides. after I stripped it down.
I'll take another look inside and post some raw cabinet pics of the insides

Level42 · « **Reply #78 on:** July 24, 2007, 02:04:57 pm »

Mmm, since it's a Midway cab...(basicaly a (Ms.)Pac) I think it would be blocks...

rikitiki · « **Reply #79 on:** July 29, 2007, 12:14:23 pm »

Yes Blocks
Here are a few interior pics

rikitiki · « **Reply #80 on:** July 29, 2007, 12:17:34 pm »

If theres any othe pics or angles anyone would like to see Ill be happy to post have a ton of pics while Im doing this

tommy · « **Reply #81 on:** August 04, 2007, 12:21:04 am »

I'm glad to see this cab coming back to life. Alot of people think that MS Pacman is the greatest but i prefer this cab and game over pacman anyday.

SLICK19 · « **Reply #82 on:** August 04, 2007, 01:11:16 pm »

This is one of the best projects I have seen in a long time. I especially like the section where the screen printing process is shown. this post has got me inspired to add a burgertime cocktail to my future project list.

Great work rikitiki !

vettetekk · « **Reply #83 on:** August 19, 2007, 11:42:59 pm »

Any progress on your Burgertime cab?? Or more importantly - the side art?? I'm undertaking a burgertime "restoration" of my own. Actually its more of a recreation, but it will "look" authentic!!
Check it out here:
http://www.parabolictechnologies.com/Arcade/burgertime/burgertime.htm
I'm hoping to get it painted soon, as the front panel artwork I just got from rikitiki is awesome and I cant wait to put it on!!
Keep us updated!!

vettetekk · « **Reply #84 on:** August 23, 2007, 08:40:33 pm »

Rikiti -
Any update on your cab? Im going to be in need of some side art, and I was wondering if your making any headway with yours?
PLEASE let us know!!
~V

Wade · « **Reply #85 on:** August 23, 2007, 11:02:05 pm »

Quote from: rikitiki on July 29, 2007, 12:14:23 pm

Yes Blocks
Here are a few interior pics

I believe they are dado+blocks. I haven't taken my BT apart to be sure, but it looks to be built like every other Midway cab I've seen (which is dado+blocks).

Wade

vettetekk · « **Reply #86 on:** September 01, 2007, 11:40:04 pm »

Has anyone heard any progress from Rikiti on this project lately? Perhaps in another thread? Im following it closely because Im restoring a BTime as well, and I was wondering if hes made any progress - especially on the side art as I am in need of that next!
Thanks!!
~V

rikitiki · « **Reply #87 on:** September 04, 2007, 12:10:00 pm »

sorry for the delay, got put on the backburner getting ready to fore this bad boy up and should have new postings of stenciling side art very soon.
Nice Job on your BT wish mine was that fast

Neilyboy · « **Reply #88 on:** September 05, 2007, 09:13:13 am »

I cant wait to see how this turns out rikitiki!! I have been waiting for some updates haha!! good luck and keep them coming. Cant wait to see the logo plate!!

Neil

WunderCade · « **Reply #89 on:** December 17, 2007, 11:15:26 pm »

Still on the burner huh.......Merry Christmas rikitikki...keep up the good work.

rotheblog · « **Reply #90 on:** July 23, 2008, 12:14:04 pm »

An update showing the final stenciling progress of the Burgertime cabinet. Rich has finished his stencils, I would imagine they would be available for sale soon at ThisOldGame.com. What is soon? I don't know, it would be complete speculation on my part, but I would guess within the next month or so.

http://www.rotheblog.com/arcade/classic-games/newly-stenciled-burgertime-arcade-cabinet/

Wade · « **Reply #91 on:** July 23, 2008, 09:26:03 pm »

Quote from: rothecreations on July 23, 2008, 12:14:04 pm

An update showing the final stenciling progress of the Burgertime cabinet. Rich has finished his stencils, I would imagine they would be available for sale soon at ThisOldGame.com. What is soon? I don't know, it would be complete speculation on my part, but I would guess within the next month or so.

http://www.rotheblog.com/arcade/classic-games/newly-stenciled-burgertime-arcade-cabinet/

This Account Has Exceeded Its CPU Quota

Please contact this site's webmaster.

Wait a few minutes and use your browser's "Back" button or click here to try again.

--------------------------------------------------------------------------------
If you are the webmaster, your account may have gotten this error for one or more of the following reasons:
Your account has used more than its share of the cpu in the past 60 second sliding window.
Your account has too many concurrent processes running simultanously.
Your account has consumed too much memory.
Your site was recently very busy trying to run inefficient scripts.
The solution would be to optimize your applications to use less CPU.
Adding appropriate indeces to your SQL tables can often help reduce CPU.
Using static .html documents instead of painful .php scripts will practically eliminate CPU usage.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news