Main > Project Announcements

Knievel's TT's (Twin Taito's)

<< < (8/17) > >>

arcadefever:
another "knievel" master piece ...

i love the way it look, simple, clean .... :cheers:

Kaytrim:
Could you take a pic of the back with it open?  I want to see how much empty space there is heading into the marque from the monitor area.  A pic at 45 degrees like the full cab pic you have above only of the back.

Thanks,
Kaytrim

p.s. Oh and how wide is the CP? Thanks

squirrellydw:
very nice work.   I also use laminate, make sure you let the contact cement get tacky before you put the laminate down and use a laminate roller.  I used the vertical grade.

Knievel:

Thanks guys. I will post all the requested pics when I get a chance, and add some more of the finished product. My wife is out of town right now and the kids are keeping me very, very busy.

Kaytrim the CP's are 22 3/4" wide. Getting the trackball in there was no small feat.

These cabinets are small but the controls are not low, perfect height actually. And the angled monitor puts the screen in a great spot. I have traced the side profile and I'm sure I will be scratch building these in the future.

Knievel:

--- Quote from: squirrellydw on April 17, 2007, 11:56:06 pm ---very nice work.   I also use laminate, make sure you let the contact cement get tacky before you put the laminate down and use a laminate roller.  I used the vertical grade.

--- End quote ---

Thanks. What did you think of the thinner vertical grade stuff? I expect you would have to get your glue very even so as to not have any bumps, etc transfer through.

The water-based contact cement goes on white and turns clear when it's ready, one more great thing about it.  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page