Xbox 360 Controller Hack Tutorial -- Wireless Hack Now Available!!!

Main > Consoles

<< < (16/86) > >>

HaRuMaN:
1) Yes, hacking the analog triggers converts them to digital in the sense that you either have 0% or 100%, nothing in between.

2) As far as I know, most people have been using them for XBLA. Some fighters will work with it, I know I've been wanting to build a controller of my own to play DOA 4 with.

Wombat:
Do you also have a wire connected to the sync button? And is it possible to attatch the play&charge kit, like in this picture:

(that would be ideal; so you can leave the battery inside of the arcadestick, and just recharge it with a usb cable without having to open the stick!)

HaRuMaN:
Yes, I can do it with a play and charge kit, as pictured. Also, I do not normally wire up the sync button (it's has a tiny button you can press on the PCB itself), but it could be done very easily.

northerngames:
Hey HarumaN, dunno if you know this already or not but the new version of the wireless 360 controller pcb guts now have common ground on everything but the LT & RT triggers :cheers:

hopefully they will revise the wired controller to be the same :applaud:

Wombat:

--- Quote from: HarumaN on April 14, 2008, 10:03:13 am ---Yes, I can do it with a play and charge kit, as pictured. Also, I do not normally wire up the sync button (it's has a tiny button you can press on the PCB itself), but it could be done very easily.

--- End quote ---
Great! Also do you maybe have the dimensions of the hacked wireless pcb? I'm interested in buying two, but I need to know if they are going to fit in my arcade-stick-housing.

Navigation

 Message Index

Go to full version