Currently I have one Dual Strike wired up for use of my Star Wars yoke (ie: as indicated by 1Up at his site
http://www.1uparcade.com/project-swyoke.html)
Basically, the wires from the gamepad go into a barrier strip and then I simply connect the wires from my Star Wars yoke into this barrier strip at the desired screw termiinal locations.
Would I be able to use this same Dual Strike gamepad to also connect my Spy Hunter steering wheel w/pots and a pedal assembly w/pots without using any switches? Basically, can I connect two separate hardware potentiometer inputs into the same potentiometer input of my gamepad?
As an example....Can I take the three wires from the LEFT/RIGHT potentiometer from my Star Wars yoke and take the 3 wires from the LEFT/RIGHT potentiometer from my Spy Hunter steering wheel and twist each of the 3 individual wires together (ie: having 3 separate strands with two twisted wires in each) and attach each of the 3 wire groupings into the barrier strip to the 3 potentiometer inputs of my gamepad? Will both the Star Wars yoke and Spy Hunter steering assembly function nicely?
It seems wiring microswitch button inputs together would work fine but I am not sure about connecting multiple potentiometer inputs to the same barrier strip locations. I do not know how that would react.
PS: I guess if this would work, then I would only be allowed to play single player games since they all would be feeding into "one" player gamepad. But this is probably would not a problem I would think.....what do you think?
UncleT