I got to work on the CP yesterday. After measuring, drawing, realising that there is 3/4 in of MDF where the track ball was, erasing, redrawing, I finally was able to start routing. First I hit the area for the trackball. I drilled some holes for the screws and the TB screw sockets to make sure that when it was flat all would be cool. After the fact I thought of a bunch of better ways I could have done this. Oh well, it still got done easily. Then I started on the joystick routing. For what ever reason (ADD) I lost my mind while routing and went a little over 1/2 inch out of the line. on the player 2 Joystick. I just sat there staring at a heap of sawdust and a huge groove that ought not be there. So, I finished routing the space that should have been routed. I then did P1 without the extra bits. I tried to fix the issue with wood filler. The more I work with this stuff, the more I dislike it. It seems to shrink. After an hour of drying and shrinking, I got a screwdriver and broke it (the wood filler) out of the evil groove. I then got some bondo (gosh I love this stuff) and filled the hole. Within several minutes I had a filled hole. This morning I went down and sanded it. Tonight I will be drilling button Holes.