While I'm waiting for my order (coils, coil sleeves, and MOSFETs) to arrive from Pinball Resource, there are a couple of things I can work on.
Tonight I attached the slam switch to the coin door. For some reason there was nowhere to put the slam switch, so I took two 4-40 by 1" machine screws, cut off the heads, and JB Welded the screws to the coin door.
I am also working on wiring up the coin door. The old coin door took vastly different connections from the new one. So, tomorrow, I'm going to go purchase a molex extractor at my favorite electronics shop.
One problem is that I don't have the wire or connectors to hook up my knocker or coin meter. It was suggested that I just use T-Taps and plain hookup wire to connect them up. Blasphemy! Instead, there's a guy on Ebay who parted out a Stargate who didn't sell the wire harness. I'll have him cut off the appropriate connectors (with wire) and send them to me. Then, all I need is the female molex connectors and pins.