Main > Software Forum
GunCon2 driver here!!! (Bacon is tasty)
swamprat96:
Yes I did - but using topguns. However the principle is the same so it should work :dunno
The trick I found was different to chrisnacks. Using Mame129 (compiled with MKchamps diff but standard should work)
In mame.ini only enable multimouse, lightgun and offscreen_reload(works for some games). Leave the mouse off and dual lightguns off. under automatic enable options I changed the lightgun setting to lightgun.
Then in each game you need to assign the buttons. Assign the triggers first and they will tell you what each gun is seen as. In my case with a mouse and two topguns the guns are Gun 2 and Gun 3. Once you have done this depending on the way the guns are numbered you might need to assign the analog x and y axis for each gun. Try the guns first. I had to only set the 2nd gun's axis as the default was gun2. Us the process described at http://wiki.arcadecontrols.com/wiki/Mame_Lightgun_Setup start at ingame setup. You'll get a slightly different entry- like Gun2 3 x and Gun 3 y but you'll also probably get additional entries. Don't worry, just set them, exit and edit the cfg file for each game to only read the x value for x analog and y value for y analog for the gun number you are setting. Tedious but once done that's it.
See how you go.
zaktallica:
hey swamp can you post your ini im still kinda confused on what to turn on and off.. Thanks
swamprat96:
OK will do when I get home. I'll post one game.cfg and the mame.ini which should give you pointers.
So I can help how many mice devices do you have connected? Guns are seen as mice and some trackballs are. If you can stick to just 2 guns its real easy
zaktallica:
I have one x arcade which has a trackball and the 2 guncons.. I dont have my mouse plugged in because I use the trackball..
swamprat96:
OK I haven't worked with x-arcade. The trackball *might* be problematic because I think the pc will see it as a mouse.. I've managed to get three mice working but not offscreen reload which only seems to work with 2.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version