Main > Monitor/Video Forum
Squished picture problem.
slicer_d:
Hey guys just got a new cabinet (Run and Gun 2) and its all good except that the picture is squished.
Ken Layton:
If adjusting vertical size/height and the 50/60 hz pot doesn't help then your monitor probably needs a capkit.
slicer_d:
Yeah figured it might be that. A couple more things I only have 5 video wires running to the board R,G,B, Hsync, and Ground should I have a Vsync or is it carried on one of the other wires?
One more question. Do I have a vertical size problem or horizontal size problem? The screen in horizontal and there are 2-3" gaps at the top and bottom.
Ken Layton:
Monitor problems are described just like the way a normal tv set would be watched so you have a vertical problem if the top/bottom are affected.
Your monitor's video/sync input is wired correctly. Not every monitor nor gameboard needs the vertical sync hooked up.
slicer_d:
So i guess I need to do the cap kit then I was looking through bob roberts site and he has cap kits of K7000's and mine is a k7191 so is that the kit I should get?
Also I was reading around about vertical output transistors going bad and causing similar problems to what I have should I replace those as well?
Oh and thanks for the help guys (guys = Ken)