Questions & Answers; The deminsions are 55 1/2" H x 35 1/4" W x 47" D; Depth is from the rear to the control panel. As for the weight, alot. It's on wheels. Two guys that go to the gym and lift weights, can get it up.
As for the control panel; i'm referring to the "insert" that you can swap out with other sega, konami or capcom candy cabs.
As for the buttons on the blue part, I had a X-Arcade "insert" fabricated and it was not feasible to have 2 joysticks, 20 buttons & the pcb on it. So, I had to put the start & select buttons directly on the cab.
As for more pics....well I took that camera back to Wal-Mart.
As for does it come apart. Yep.....That how I ran all the extra cables & such. I'd say for you to take it apart, move it and put it back together will take a day. At my old place it fit through the main doors, few stratches. But getting it into a room door....I had to be pretty creative. See pics....The pic with the red & green lines. Where the green line is thats where it comes apart, but where the red lin is that is where there is a botton board that the wheels & various other components are attached to and that bottom board does not come off. From the back to the board is about 36". The pic where there is only the red line, is where the are a pair of mounting bars for the front part of the cab and those don't come of either, From the back to these bars is about 25". Well to make this story short, to put it in the room; i had to take it apart, lay it on its side, push the top portion in the room first as far as it could go, turn it to the left or right and finish pushing it into the room.....It like putting something shaped like an "L" into a hole. Yeah thats it.............