Arcade Collecting > Merit/JVL Touchscreen

JVL Echo Not Booting Up

<< < (4/5) > >>

mahkeymike:
Yeah thats not a jp70 ( thats the gpu chip i have ) I am not familar with the jp90, but like megatouchmike said, test everything else before going out and trying to get a replacement jp90.

Phlav:

--- Quote from: Megatouchmike on June 12, 2024, 06:03:31 am ---The motherboard is in the silver chassis. The memory is on the motherboard

--- End quote ---

Thank you for the info. I will check it out and report back.

Phlav:

--- Quote from: mahkeymike on June 12, 2024, 02:49:30 pm ---Yeah thats not a jp70 ( thats the gpu chip i have ) I am not familar with the jp90, but like megatouchmike said, test everything else before going out and trying to get a replacement jp90.

--- End quote ---

Bummer. Would have been a blessing if you did have a brand new jp90 especially if it's what I will need to fix this thing. Even if it wasn't I think I would have still taken it off your hands in case I need it down the road.

Megatouchmike:
I have a jp90 machine I'm converting to megatouch so I'll have a board soon, if you weren't lucky

Phlav:
Hey Megatouchmike. I am still in the process of testing out the memory but has been so busy I got side tracked. I placed an order for the same memory that's on the board and waiting for it to come in. But I tested it out with another memory stick and not luck. It was a 16 gig stick I had laying around and not sure if the higher capacity will not work but I thought I would try it in any case. I am thinking the memory may not be the issue sadly and will know for sure once I receive it, but you mentioned that you might have a JP90 board. As I may be heading towards the motherboard issue, is that still an option and how much will you sell it for?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version