| Main > Project Announcements |
| Project Too Big and Spinny |
| << < (6/10) > >> |
| TheRetroCarrot:
Correct, it's not as aesthetically pleasing this way as the bezel has to sit out a tiny amount, but I wanted it to be as simple as grab the bezel and turn it so that I'm motivated to do it. |
| firedance:
May seem to a silly question, have you measured the doorways to make sure it actually gets through them when it's fully built :angel: |
| TheRetroCarrot:
It's getting built in the room. Everything was designed to be disassembled. The panels are all sitting in it's final resting place right now, just setting up a paint booth outside and they'll be sprayed and moved back in before assembly. It'll be setup right next to my DrumMania setup I built last year :) |
| TheRetroCarrot:
Started spraying today. The cheapo HVLP seems pretty decent, but doesn't do the greatest job with the BIN primer I'm using. More overspray than I'd like. Not really a big deal since the stuff sands ridiculously well. The paint itself will be much less frustrating. Needing ammonia to clean the gun so often is extremely wasteful and time consuming, whereas the actual spraying takes no time at all. This will likely take quite some time as I don't have anywhere nice to let panels dry other than my makeshift booth, and I can't do many at once due to the overspray. Got 2 panels primed after work today, starting with all the low importance items that won't be visible. |
| firedance:
--- Quote from: TheRetroCarrot on May 01, 2024, 01:53:01 pm ---It's getting built in the room. Everything was designed to be disassembled. The panels are all sitting in it's final resting place right now, just setting up a paint booth outside and they'll be sprayed and moved back in before assembly. It'll be setup right next to my DrumMania setup I built last year :) --- End quote --- Nice ;D |
| Navigation |
| Message Index |
| Next page |
| Previous page |