Author Topic: Fretsaw project gallery: some scrapwood projects added (Read 8936 times)

yamatetsu · « **Reply #80 on:** April 21, 2024, 12:00:45 pm »

"Cutie"

14,7 x 15,5cm, backer board 4mm, cutie 4mm.

Nothing to say about this one. It's cute.

"Horse"

15 x 19,5cm, backer board 6mm, horse 4mm

This one has an 'oldschool cartoon character' feel to me. Silly, but likeable.

"Bon appetit"

21 x 21,9cm, backer board 6mm, vulture 4mm

This one taught me not to use the cheapest plywood, especially not in combination with a dull blade. Terrible tearouts on the backside, took a looong time to sand those down.
Saved a few cents, gained a lot more work and frustration.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Fretsaw project gallery: some scrapwood projects added (Read 8936 times)

yamatetsu

Re: Fretsaw project gallery: some scrapwood projects added