Hi to all,
I have reinstalled from scratch new version of GroovyArcade (GroovyArcade-Arch2019.03.10-x86_64.iso) in order to replace the old one.
1. Started emulator from USB set monitor & other sfuff : work fine
2. Installed with previuos setting on new SSD disk (tested many times seems to be good!!) , I was able to install without any problem (auto HDD config) than I configured the roms on a secondary disk like did on old version.
3. First reboot is good
4. Next boot hang on Groovy Arcade splash screen
5. After several reboot, once starts normally until the next boot problem :-(((
I have tried multiple times with same result.
Now I'm able to boot from USB & acess to the SDD disk ...
Please help me !! What I have to check ?
Thanks, Claudio.