Arcade Collecting > Merit/JVL Touchscreen

JVL Conquest Factory Reset Failed. Error code 2

(1/3) > >>

kjtemp:
Recently got a JVL Conquest for 20 bucks.  It comes up with File System Corrupted and wants a factory reset.  I do the factory reset but fails instantly with a error code 2.  Has anyone every had this error?

kjtemp:
My on-board lithium battery is showing a voltage of 1.5v when the jvl is powered off.  Could that be the cause?

lilshawn:
it's certainly not helping. as soon as it hits 2.X and under it's time to replace it.

failed factory reset means you are going to have to do a re-installation from the CD's. you have a corrupted CF drive or possibly bad CF drive. (i believe it's compact flash drive on that machine). i've had 2 or 3 go bad in the past.

it costs a couple bucks to replace the batteries...change them out and give it another try with the reset. if it still fails, you are going to need CD's to re-install and likely a new CF drive. you can try and just install overtop of the old CF drive and see if it works. it may work, it may not. they are getting pretty wore out by this point.

kjtemp:
I did get a new CF card and same thing.  Got a new battery and removed the old one.  Waiting for a battery holder.

I do have the itouch 8 CD and working CD drive.

kjtemp:
It came with a 64mb cf card and when I removed it the bios said it required at least 64mb card.  Could the issue be that the CF card needs to be larger?  My replacement cf card is 64mb.

Navigation

[0] Message Index

[#] Next page