I've been trying to set up retroPi for a while now, the issue I'm having is that when i boot up a rom the lights in my buttons are supposed to change to match that roms settings. Instead the default animation that runs when the frontend is active is the only thing i get. The software that controls the lights is called RGBcommander, i'm using an ultimarc I-Pac UltimateIO board. Here are the logs that rgbcommander gives me when i run it but i don't understand/can't find help on this error message.
06/04/20 16:37:50 [DEBUG] [processMonitorWorker] starting processMonitorWorker
06/04/20 16:37:50 [INFO] [startListening] selectserver: listening on IP 0.0.0.0, socket 10
06/04/20 16:37:50 [WARNING] [startListening] selectserver: bind failed, error: 98
06/04/20 16:38:06 [INFO] [RGBAstart]random animation chosen -> Pattern30_32
06/04/20 16:38:06 [ERROR] [connect] failed to claim interface nr 3 -> LIBUSB_ERROR_INVALID_PARAM
06/04/20 16:38:06 [WARNING] [connect] assuming UIO non gamepad enabled firmware - retrying
06/04/20 16:38:07 [WARNING] [fadeSpeed] ULTIMATEIO_1 fadespeed set to 0 -> FAILURE
06/04/20 16:38:07 [WARNING] [setOff] setting ULTIMATEIO_1 -> fadeSpeed(0) -> failed
06/04/20 16:38:07 [INFO] [setRGBAspeed] RGBA Pattern30_32 speed set to 100
06/04/20 16:38:07 [INFO] [RGBAthread] rgba Pattern30_32 play back start at speed 100
Can anyone help me?