Arcade Collecting > Merit/JVL Touchscreen

Megatouch 6000 Access Setup Menu if Coin box button not working

<< < (3/8) > >>

gavinlew:
Cheers thanks will give that a go see what happens , any ideas about the software too ? I’ve got a 4gb CF card and adapter was thinking of swapping out the HDD to use that as well


Sent from my iPhone using Tapatalk

mahkeymike:

--- Quote from: gavinlew on October 14, 2019, 06:58:09 pm ---Cheers thanks will give that a go see what happens , any ideas about the software too ? I’ve got a 4gb CF card and adapter was thinking of swapping out the HDD to use that as well


Sent from my iPhone using Tapatalk

--- End quote ---

Baby steps.

gavinlew:
Had some time this morning and relocated the IO board to the main motherboard ISA socket , no difference no sound , the Test button on the board doesn’t respond , and the cable from the coin box is too short to attach


Sent from my iPhone using Tapatalk

orizzle:
Either your ioboard is still not making a good connection or the board itself is shot

Sent from my Pixel XL using Tapatalk

gavinlew:
Riser board replaced still no sound , not even a beep from the BIOS during POST . I suspect that Setup/Calibration buttons won’t work either.

Now got a further problem since I carefully moved the megatouch to a new place in the bar that the screen intermittently blanks, then some minutes later will dimly come back to life.


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page