Main > Monitor/Video Forum
The ultimate VGA to SCART adapter
gambaman:
Hello. Is it possible to buy the dongle assembled? A friend of mine is interested.
--- Quote from: buttersoft on February 15, 2021, 08:01:38 pm ---So that mod for passthrough dongle i was working on is done. This one is a double-ended version, male HD15 to female HD15. It has the LED's, taking in H-sync and V-sync and allowing C-sync through only when it detects 15kHz, blocking everything else. It allows you to plug in any VGA or VGA-toBNC or -SCART cable to the out end as required.
Points to note:
-You will need to wire the RGB lines from input to output yourself.
-You will need to wire up all the input/output pins on the PCB including all ground lines (just in case)
-You will need to fab the board at 0.8mm thick.
-You will need to either use a PCB HD15 male plug or trim a solder HD15 male plug. (https://www.aliexpress.com/item/1005001418455591.html?spm=a2g0s.9042311.0.0.1f164c4dN9vaBg)
-You will need to 3D-print the housing for yourself :)
-Make sure you have the means to program the PIC before doing anything else like ordering parts!
More general info is in this thread :)
PCB - https://oshpark.com/shared_projects/mMqybOjf
housing - https://anonfiles.com/vbg3f5J7p0/DB9_double_mine_-_complete_tiny_v5_stl PM for updated link, pls!
--- End quote ---
buttersoft:
Well, for the record, i don't build them to sell as there wouldn't be any profit in it. I did make one or two spares though, so PM me and we can work something out :)
EDIT: Gambaman, did you PM me?
EDIT2: Anyone else, pls see the retails vendors subforum if you are keen to purchase from me. Or just PM and i can link you.
Rion:
--- Quote from: gambaman on August 13, 2019, 08:35:25 pm ---
--- End quote ---
gambaman (SCART VADER)
I see that you back in 07/28/2020 improved the resolution switching.
Is there any way to improve it even further?
Seeing as some games in Retroarch are struggling when switching from 240p to 480i.
Rion:
--- Quote from: buttersoft on March 10, 2023, 05:24:20 pm ---Well, for the record, i don't build them to sell as there wouldn't be any profit in it. I did make one or two spares though, so PM me and we can work something out :)
EDIT: Gambaman, did you PM me?
--- End quote ---
PM sent
JP24:
--- Quote from: buttersoft on February 15, 2021, 08:01:38 pm ---So that mod for passthrough dongle i was working on is done. This one is a double-ended version, male HD15 to female HD15. It has the LED's, taking in H-sync and V-sync and allowing C-sync through only when it detects 15kHz, blocking everything else. It allows you to plug in any VGA or VGA-toBNC or -SCART cable to the out end as required.
Points to note:
-You will need to wire the RGB lines from input to output yourself.
-You will need to wire up all the input/output pins on the PCB including all ground lines (just in case)
-You will need to fab the board at 0.8mm thick.
-You will need to either use a PCB HD15 male plug or trim a solder HD15 male plug. (https://www.aliexpress.com/item/1005001418455591.html?spm=a2g0s.9042311.0.0.1f164c4dN9vaBg)
-You will need to 3D-print the housing for yourself :)
-Make sure you have the means to program the PIC before doing anything else like ordering parts!
More general info is in this thread :)
PCB - https://oshpark.com/shared_projects/mMqybOjf
housing - https://anonfiles.com/vbg3f5J7p0/DB9_double_mine_-_complete_tiny_v5_stl PM for updated link, pls!
--- End quote ---
I'm very interested in building this! Do you have a components list to complete this project? I think I have them all figured out (pretty green in this realm) just not sure on the 10n cap--is it utilizing this one?... https://es.rs-online.com/web/p/condensadores-ceramicos-multicapa/5373369
Also I'm too new to this forum, so can't PM for your updated model link.
Thanks!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version