Main > Monitor/Video Forum
The ultimate VGA to SCART adapter
buttersoft:
So that mod for passthrough dongle i was working on is done. This one is a double-ended version, male HD15 to female HD15. It has the LED's, taking in H-sync and V-sync and allowing C-sync through only when it detects 15kHz, blocking everything else. It allows you to plug in any VGA or VGA-toBNC or -SCART cable to the out end as required.
Points to note:
-You will need to wire the RGB lines from input to output yourself.
-You will need to wire up all the input/output pins on the PCB including all ground lines (just in case)
-You will need to fab the board at 0.8mm thick.
-You will need to either use a PCB HD15 male plug or trim a solder HD15 male plug. (https://www.aliexpress.com/item/1005001418455591.html?spm=a2g0s.9042311.0.0.1f164c4dN9vaBg)
-You will need to 3D-print the housing for yourself :)
-Make sure you have the means to program the PIC before doing anything else like ordering parts!
More general info is in this thread :)
PCB - https://oshpark.com/shared_projects/mMqybOjf
housing - https://anonfiles.com/vbg3f5J7p0/DB9_double_mine_-_complete_tiny_v5_stl PM for updated link, pls!
Gunstar:
@buttersoft - Does your redesign use Zener and Schottky diodes?
buttersoft:
No it does not. My version is cut down from the original, and uses no diodes. Were you thinking i should add some to this reduced design?
gambaman:
UPDATE: They do not sell the box version anymore, buy all the design files are available here.
oomek:
It's really sad they are not making it anymore. I would really sink my teeth in 2 of them F15s
http://vga-scart-converter-f-15.mozello.es/catalog/params/category/0/item/1443803/
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version