Arcade Collecting > Merit/JVL Touchscreen

Fan speed

(1/3) > >>

SCking:
Hello.  Jvl encore. HD 2. SN ct09-1010-214011. Game freezes right after boot up “locked” says cpu fan speed critically low.  The fans are good. Also in bios fan speed(s) all show 0 rpm. I can  physically see the fans working.  Can this error be bypassed? If not what can/will fix this problem? 

mahkeymike:
Where they replaced with 3rd party fans? From my experience, the fans need to be above a certain RPM, anything less and it will throw cpu/cabinet speed errors.

SCking:
Yes, 3rd party. Betson wants 33$ per “jvl replacement” fan (needs 2). I grabbed a couple cpu processor fans off junk towers laying around. In bios these fans will not register on fan 1 or fan 2 socket.  (cpu and gpu) but will read on fan 3 socket (system). I’d hate shelling out 70$ for two fans and the two needed sockets not registering rpms. 


Sent from my iPhone using Tapatalk

mahkeymike:
AV-5015S
DC 12V 0.14A

Worked for me. I think they were $5 each on Amazon.
Heres a pic.

SCking:
Cool. I’ll order a couple. Thanks!  I’ve just got a bad feeling those sockets aren’t registering rpms. I’ll def try the new fans before I start shopping for new board. Which I’m sure won’t be easy or cheap.....

Navigation

[0] Message Index

[#] Next page