| Main > Project Announcements |
| Nintendo cabinet build - Wreck-It Ralph |
| << < (4/71) > >> |
| UnclearHermit:
Thanks. I've read so many threads, including all of yours many times, and somehow never picked up on the fact that there was laminate on the INSIDE as well as the outside. A couple of questions, if you don't mind. In your photo here https://www.flickr.com/photos/chancekj/18583008985/in/album-72157649587158666/ (sorry, not sure how to get a direct image link from Flickr) is that the semi-gloss laminate that you can see extend back to an inch or so behind the bezel support? I'm assuming that means it runs vertically and appears at the top of the cabinet at the point in the image that you linked. Makes a lot more sense why there's a solid vertical line if it's a sheet of laminate! Also, it might be the light but that picture you linked of the side panel "inside" appears to show the semi-gloss laminate, then a tiny groove a recessed bare wood, then nearly an inch of wood that appears to have grain running horizontally and then the rest of the exposed wood running with a horizontal grain. Is there a reason for the two wood grains that or is it just a past repair or something? I can't think of anything I've read that would explain it. Thanks again, and also thanks for the massive amounts of posts you've made on these cabinets over the years :applaud: |
| ChanceKJ:
. |
| ChanceKJ:
. |
| ChanceKJ:
. |
| ChanceKJ:
. |
| Navigation |
| Message Index |
| Next page |
| Previous page |