Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: JVL Retro Interface board battery  (Read 488 times)

0 Members and 1 Guest are viewing this topic.

mshort520

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • I want to build my own arcade controls!
JVL Retro Interface board battery
« on: May 25, 2018, 07:03:47 pm »
I have a JVL Retro that threw the "interface board battery is low" message. I soldered in a new battery, but I still get the same message. The new battery measures 3.66 volts with the machine running or off. Have any of you seen this problem? Thanks

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 532
Re: JVL Retro Interface board battery
« Reply #1 on: May 28, 2018, 09:44:49 am »
Did you try doing a factory reset after you replaced the battery?

mshort520

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • I want to build my own arcade controls!
Re: JVL Retro Interface board battery
« Reply #2 on: May 29, 2018, 11:35:55 am »
No I didn't. How do I perform a full factory reset?

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 532
Re: JVL Retro Interface board battery
« Reply #3 on: May 29, 2018, 03:07:09 pm »
press and hold the yellow setup button during boot up till it goes to the factory reset screen.

mshort520

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • I want to build my own arcade controls!
Re: JVL Retro Interface board battery
« Reply #4 on: May 29, 2018, 03:38:53 pm »
That's what I thought but when I hold in the yellow set up button, then turn on the machine, then continue to hold it , the machine just boots up normally. When the machine is on the set up button operates as it should. Tried it 4 times in a row and it always booted up normally. ???  I'm running itouch 10+

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 532
Re: JVL Retro Interface board battery
« Reply #5 on: May 29, 2018, 07:53:00 pm »
Maybe the Interface board is faulty? I have had the low battery issue, and even after replacing with another 3.6v battery, got the same message, but after a factory reset the error was fixed.

mshort520

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • I want to build my own arcade controls!
Re: JVL Retro Interface board battery
« Reply #6 on: May 29, 2018, 08:28:44 pm »
Finally got it to reset (just kept trying) and now the error message is gone.  :applaud:  Thank you  for the help.

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 532
Re: JVL Retro Interface board battery
« Reply #7 on: May 29, 2018, 08:40:11 pm »
You are welcome. :cheers:

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31