Author Topic: Help with setting up G920 with Cruis’n USA and World (Read 469 times)

Nitro0602 · « **on:** November 15, 2023, 04:07:45 pm »

====================SOLVED!!!!======================

Used older models of both USA (V1.1) crusnusa11 and World (V1.9) crusnwld19 (Arcade64 0.260)
——————————————————————————————————————————————————————————
——————————————————————————————————————————————————————————

In calibration settings turn the wheel 90 degrees and hold that position and press F2 (so the bottom bar under the middle logo is facing right or left) - my wheel is set to 180 degrees rotation
For gas, I pressed it 3 times and held it down followed by F2

Hope this helps anyone in the future.. haven’t seen any tutorials on it.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Help with setting up G920 with Cruis’n USA and World (Read 469 times)

Nitro0602

Help with setting up G920 with Cruis’n USA and World