| Main > Everything Else |
| sketchup |
| (1/3) > >> |
| dkersten:
Anyone do any cool modeling with sketchup? I fiddled with it today and started drawing up a scale version of my new home theater. It's easier to use than the last time I fiddled with it 2-3 years ago. I might have to buy it, this is kinda fun... This is maybe 60% done, need to model the wall treatments and final colors, the lighting and Atmos speakers, the furniture, the baffle wall, and draw up the screen and panels that mount on the screen wall frame. Subwoofers are 18" (two more in back), mains have a 15" midbass driver, 4" mid with waveguide, and compression driver with waveguide for the highs. Not sure on colors yet, always liked the deep red with black, but might mix it up a bit this time, maybe go with 3 tones of gray/black and throw in some stainless steel highlights here and there... |
| Vigo:
|
| Howard_Casto:
--- Quote from: Vigo on January 12, 2018, 02:26:22 am --- --- End quote --- ^^This^^ That looks like a bit too much speaker for a home setup. |
| jdbailey1206:
|
| BadMouth:
How did you arrive at the speaker placement? I would have settled for 2 subs up front in order to get the left and right channels further apart (but not so far as to be in the corner of the room). Have you done any experimenting with the 18 to see if there are going to be any problem frequencies? The perfect cabinet in theory often sounds like crap in a room. Sometimes you have to experiment and adjust the design around problem frequencies. |
| Navigation |
| Message Index |
| Next page |