Hey guys, I purchased a Pandora's Box 4s+ to go in my new bartop and it came with a JAMMA harness which I assumed would be correct for the Pandora's Box. However, it appears there is only a Coin 1 wire, nothing connected on the solder side coin 2 pin, and the Coin 1 goes to a little harness with four other wires in it. The connectors on the end of the button wires also appear to be too small for my button microswitches. Am I looking at this wrong or do I need to get a different harness? If it's cheaper maybe someone could point me in the right direction for the correct size connectors for larger microswitches? Thanks in advance.