Main > Driving & Racing Cabinets
Outrun 2 FXT 2.5 Released!
Howard_Casto:
That's on me. Forgot that I changed the format between ver 2.2 and 2.4.
https://www.mediafire.com/file/l3rklbvtuuz8c0b/texmods.zip/file
Here are all my texture mods, including some wip ones. I'd suggest just sticking to the uncensored mod and maybe the 2sp loading screen.
shakeheartbreak:
--- Quote from: Howard_Casto on May 18, 2019, 10:08:41 pm ---That's on me. Forgot that I changed the format between ver 2.2 and 2.4.
https://www.mediafire.com/file/l3rklbvtuuz8c0b/texmods.zip/file
Here are all my texture mods, including some wip ones. I'd suggest just sticking to the uncensored mod and maybe the 2sp loading screen.
--- End quote ---
YES! I knew something was up but you've of course provided the right files Howard.
Unfortunately I now get "Run-time Error '75': Path/File access error" even though I'm running the config tool in Administrator mode. I'm assuming I've got the files in the right folder too otherwise they wouldn't be showing in the config tool at all?
Howard_Casto:
Ok before I go tracking down a bug that may not exist let's double check everything.
The fxtcfg.exe should be in the same folder as OR2006c2c.exe. There should be a fxtcfg folder within that folder and the texpacks should be installed to fxtcfg\texpacks\texmods\
Once extracted each texpack should be in a folder and inside that folder should be the .sz files and a readme.txt.
This part is important... there should be a fxtcfg\texpacks\originals\ folder. If it's not there it could throw an error as I'm not sure if I put in any error catching.
Please check all of that and let me know.
shakeheartbreak:
--- Quote from: Howard_Casto on May 20, 2019, 12:08:29 am ---Ok before I go tracking down a bug that may not exist let's double check everything.
The fxtcfg.exe should be in the same folder as OR2006c2c.exe. There should be a fxtcfg folder within that folder and the texpacks should be installed to fxtcfg\texpacks\texmods\
Once extracted each texpack should be in a folder and inside that folder should be the .sz files and a readme.txt.
This part is important... there should be a fxtcfg\texpacks\originals\ folder. If it's not there it could throw an error as I'm not sure if I put in any error catching.
Please check all of that and let me know.
--- End quote ---
- FXTcfg.exe is in the same folder as OR2006c2c.exe
- There's a FXTCfg folder with the following directory: C:\Users\Lee\Documents\Games\Outrun 2006 Coast To Coast\FXTcfg\texpacks\texmods
..where the seven folders you've posted have been placed
- Each folder has .sz files and a readme.txt
- There's also a fxtcfg\texpacks\originals\ folder and in there are two files:
..Sprite^spr_SPRANI_CLAR_RANK_Exst.sz
..Sprite^spr_SPRANI_SUMO_LOADING_Exst.sz
I'm also running the FXTcfg tool as admin. Very happy to try and/or confirm anything else that might help you.
(And thanks, as ever, for all your hard work on behalf of myself and everyone else benefitting from all your hard work)
--
Edit: This might help you debug though. At least one of those two files mentioned at the end weren't there before I tried running the tool, I'm sure of it.
Howard_Casto:
Yes, originals should be empty initially.... it's where the original files get backed up as they are swapped out for the modified ones. That fact that some of the files copied over is strange.... it means that it errored out in the middle of the installation process. An access error typically means that a file cannot be moved because it is locked or has some strange permission attached to it.
Which mod did you try to install and which files got copied over?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version