Main > Driving & Racing Cabinets
Outrun 2 FXT 2.5 Released!
potato:
there is a DLL you need to register if you check the 2.4 thread it's the DLL inside the zip (if it wasn't in 2.5 check 2.4).
you also need to install the 2 font files inside the zip (check 2.4 & 2.5), right click select install.
FFB etc uncheck if you don't have a wheel.
potato:
--- Quote from: FeR on December 11, 2018, 08:45:55 pm ---This patch worked flawlessly until I updated the os to win7 now the horn is off and the rumble too, using the latest version 2.5.
--- End quote ---
alright it seems bonus car only works with Wheels on arcade mode.
After some testing with G25 i have come to a conclusion:
1.You can't assign H & Up/Down on the same gear shifter because even in G25's Sequential Mode the Gear Up/Down is same button as H-Shifter Mode Gear 1 & 2. you can however still use the paddle shifters (either via Gear Shift Config Button "9" Up & "8" Down) or check "Don't Block Original Up/Down Input" and assign the button in the Game Menu. This way you can shift using H-Shifter and also paddle shifter for sequential. I find Paddle Shift easier to use compared to original shifters.
2.H-Shifter is not useful in this game. I cannot start a drift by changing gear from 5-4-5 or 6-5-6 instead car just slows down and speeds up. however i can still use the paddle shifters to start the drift (5-4-5/6-5-6). So it seems in this game while the H-Shifters works it doesn't work in the same way as Down/Up. Maybe it's how the Down/Up Gear transition is being coded that using the H-Shifter misses out certain inputs (Example H Shifter 5-4-5 the game reads it as Gear 5, Gear 4, Gear 5, while the Down/Up input reads it as Down-Up and initiates drift mode.
3.Like someone pointed out the Brake Pedal needs to be assigned to RZ, and in the Logitech Profiler the Brake needs to be "Inverted". Gas Pedal has no need to be Inverted even though in the game menu controller config it reads as Inverted just ignore it it will work fine in race. In the Logitech Profiler click on "Brake" -> "axis Properties" and Check "Invert Axis Polarity". I've also created 2 Logitech profiles with same settings for "OR2006C2C" and "OR2FXT". OR2006C2C is the one you need to get the profiler settings to work while "OR2FXT" just to make it easy to launch the Game from Logitech Profiler. Sometimes the profiler doesn't notice the game launch from Shortcuts easy way to tell is if you have set your Degrees Of Rotation to 180-270 you can feel the lock during game launch.
4.For those having menu scrolling automatically Up/Down during the 1st run it's due to the steering configured as Gas Pedal to stop it from moving just hold the Gas Pedal down half way and use your keyboard to navigate into the controller settings and reassign the buttons.
5.The In Game Buttons are different from the ones you assign in the FXT Menu. "Button 1" in game is actually "0".
6.To fix no music sound in Arcade in FXT Menu Click Configure Enhancements & Uncheck "Enable Bonus Songs for Arcade Mode"
FeR:
--- Quote from: potato on December 14, 2018, 11:28:36 am ---there is a DLL you need to register if you check the 2.4 thread it's the DLL inside the zip (if it wasn't in 2.5 check 2.4).
you also need to install the 2 font files inside the zip (check 2.4 & 2.5), right click select install.
FFB etc uncheck if you don't have a wheel.
--- End quote ---
So Sorry I've been so busy that I have no time to reply since then, well I've installed both fonts successfully, Again dont know how to register de DLL file and the horn and the FFB are still off, by the way I'm using a DS3 controller by MotioninJoy (offline interface), and again the force feedback works fine for another games.
kadioguy:
Hello,
I am on windows 7 x64, i7-3770, gtx 1060 3g and 16g ram, using a Xbox one controller.
For me, I have to untick "Enable Overlay" to make "windowed" take effect, or the game will run in full screen mode anyway. And I have to untick "Enable Force Feedback" to make "Force Feedback" take effect (strange it may sound, but it is true for me), or else OR2FXT.exe will crash when "Outrun 2" title appears.
The title appearing is still "Outrun 2", not "Outrun 2 FXT".
Could someone give me any suggestion? :)
shakeheartbreak:
--- Quote from: Andreve on September 29, 2018, 07:29:34 am ---Finally got it to work, wow what an experience! Reinstalled and only copied 2.5. Not giving error popups anymore. Adjusted some ffb settings and so sweet! Thanks for this mod, just not sure about the texture fix thats empty in the config?
--- End quote ---
Did you ever find the answer to this? I too just get a blank entry in the texture mod window, there are no texture packs in the installation (either 2.4 or 2.5) and I can't find them anywhere to download. I can only see the French, German etc. packs in an earlier thread and I'm just looking to install the English language ones.
(Also, I'm assuming that these packs will replace the menu screens with something from the arcade and also hopefully upgrade the 2D graphics to HD - but maybe I've misunderstood that part).
--
Edit: Actually, after some digging around I think I've found something. 2.4 and 2.5 don't seem to come with any actual texture packs. However I downloaded 2.1b from an old forum thread I came across and that has the following files in the directory below:
\OR2FXT2.1b\FXTcfg\texpacks\mods
spr_SPRANI_CLAR_RANK_Exst.sz
spr_SPRANI_CONGRATS_CVT_Exst.sz
spr_SPRANI_ETC_CVT_Exst.sz
spr_SPRANI_GAME_CVT_Exst.sz
spr_SPRANI_SELECTOR_CVT_Exst.sz
spr_SPRANI_SUMO_FE_CVT_Exst.sz
Unfortunately I can't test these at work atm, but I'll try tonight and see if this does the trick.
2.1b can be downloaded from here for anyone who can try before: https://www.mediafire.com/file/4qhywdhu74vctdb/OR2FXT2.1b.rar
--
Edit #2: Nope.. couldn't seem to get them working. I put them under FXTcfg\texpacks\texmods but they still didn't show in FXTConfig.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version