Software Support > GroovyMAME

No vga resolution for steam king of fighters xiii

<< < (3/3)

keilmillerjr:

--- Quote from: Calamity on November 01, 2017, 10:57:28 am ---
--- Quote from: keilmillerjr on October 26, 2017, 11:26:52 pm ---* edit to add 360 between the other modelines such as 192, 200, 360, 440, 576

--- End quote ---

That step is wrong. Those numbers are not "modelines". Remind the format:

crt_range 0-9   HfreqMin-HfreqMax, VfreqMin-VfreqMax, HFrontPorch, HSyncPulse, HBackPorch, VfrontPorch, VSyncPulse, VBackPorch, HSyncPol, VSyncPol, ProgressiveLinesMin, ProgressiveLinesMax, InterlacedLinesMin, InterlacedLinesMax

In order to allow 360i, edit the range this way.

Default (allowed interlaced range 448i-576i):
crt_range0  15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.192, 1.024, 0, 0, 192, 288, 448, 576

Modified (allowed interlaced range 360i-576i):
crt_range0  15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.192, 1.024, 0, 0, 192, 288, 360, 576

--- End quote ---
Thank you so much!

keilmillerjr:
I tried editing monitor.ini as described, changing the InterlacedLinesMin line from 488 to 360. GroovyMame worked as expected, but kof13 was using a super resolution and looked all squished.

I noticed vmmaker yields the same output when generating modes, regardless if InterlacedLinesMin is 488 or 360. I went back and fourth a few times. Is there something else I should be changing as well?

Calamity:
 640x360 won't be created unless you add it explicitely to your user_modes.ini/user_modes_super.ini file.

MK3FANATIC:

--- Quote from: Calamity on November 01, 2017, 10:57:28 am ---
--- Quote from: keilmillerjr on October 26, 2017, 11:26:52 pm ---* edit to add 360 between the other modelines such as 192, 200, 360, 440, 576

--- End quote ---

That step is wrong. Those numbers are not "modelines". Remind the format:

crt_range 0-9   HfreqMin-HfreqMax, VfreqMin-VfreqMax, HFrontPorch, HSyncPulse, HBackPorch, VfrontPorch, VSyncPulse, VBackPorch, HSyncPol, VSyncPol, ProgressiveLinesMin, ProgressiveLinesMax, InterlacedLinesMin, InterlacedLinesMax

In order to allow 360i, edit the range this way.

Default (allowed interlaced range 448i-576i):
crt_range0  15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.192, 1.024, 0, 0, 192, 288, 448, 576

Modified (allowed interlaced range 360i-576i):
crt_range0  15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.192, 1.024, 0, 0, 192, 288, 360, 576

--- End quote ---

640x360i was very useful for me, thanks. Would there be some adjustment where I could also add 800x600i?

Navigation

[0] Message Index

[*] Previous page