Software Support > GroovyMAME

emu4crt Mednafen mod - update 1.26.1

<< < (6/76) > >>

funkycochise:
Even if setting was the trickiest, once in 640x480,
GUI was readable. Configuration of mednafen is a bit strange,
as it repeat same input several times.

I’ll go ahead with testing.

yuuyuubaishu:
I test the last A4 version and can not switch to Fullscreen mode，but the A2 is all right even with auto switch modeline（pretty good）。I wonder if   it’s the bug in A4……

silmalik:
Hi,

You are right, it's a bad bug.

Version A05 fixes that: https://github.com/emu4crt/files/blob/master/mednafen-0.9.48-emu4crt-A05-win64.zip

yuuyuubaishu:
Thanks for your great job! I have test A5 and  succeed.

in the meantime I did find some image get stuck extremely shortly ，I am sure the Vertical Refresh Rate generated by crt_emudriver cannot exactly match.

vmmaker generate 240P with 60hz,but groovymame can automatically adjust it to be suit for different consoles such as SS Refresh Rate 59.764793hz and NES 60.098800hz,you can get smooth image without any tear.

But when you run a NES game using emu4crt with 240P ,you have trouble updating the default  240P Vertical Refresh Rate, slight graphic intermission will occur throughout the whole process

And SNES Faust is not available

I am  sorry for my poor english.

silmalik:

As explained in documentation, this mod does not generate specific modelines for emulated system, it uses video modes available, with no consideration about refresh rate.

To get "perfect" sync with emu4crt, you can configure VMMaker to generate accurate video modes for one system, emu4crt will use them.
But, you'll have to reset VMMaker when changing emulated system.

What are the benefits of the Faust SNES core ? I may have a look to it.

Navigation

[0] Message Index

[#] Next page

[*] Previous page