I know you are all probably tired of this question, but being new to this...well, I am slightly confused.
My scenario is this:
A Carrier Airwing cabinet (fully working)
A PIII (933) computer
A ATI RAGE/RAGE II PCI video card added into the system
MAME32
A JPAC card
=========
Ok, I have unplugged the JAMMA card from the old Carrier Airwing PC boards. I plugged in the JPAC card to the JAMMA slot. I have the JPAC jumpered on the 15 and 31.
My problem is that the display on the monitor is wigged out. The screen is split into two, with the right hand side of the screen on the left hand side, and the left hand side of the screen on the right hand side. Outside of that, it look good. I did research on the cabinet and found that it is a 15 khz monitor. (
www.klov.com)
(
STANDARD RESOLUTION
HORIZONTAL VERTICAL
Scan Frequency: 15.72 KHz Scan Frequency: 60.0 Hz
Scan Period: 63.6