| Arcade Collecting > Restorations & repair |
| Please help with exidy crash power supply issue |
| << < (3/4) > >> |
| chopperthedog:
If you can determine the origin and destination of the wires on 1 2 3 4, I bet 2 will be from the main power plug and the other 2 shoot off to the monitor, and it's obvious that the red and black will be for 5vdc. This is a standard modern regulated supply that can be had from here or many other places: http://www.arcadeshop.com/i/804/switching-power-supply-15-amp.htm You would just group the blk and wht wires going to that transformer and hook to ac in and the red goes to +5 and blk goes to common. good day. |
| Slawrencerep:
Thanks for all your help. I'll post a follow up picture after installing the new power supply. I also intend to build a new cabinet for it as this one is not in very good shape and appears to have sat outside at some point in its life delaminating the corners of the particle board. |
| chopperthedog:
Changing all the capacitors on the monitor is an absolute must. It might be fine for a bit, but you have to think of old caps as original factory tires on a 78 Nova. Yeah it holds air, but wouldn't want to rely on em. good day. |
| Slawrencerep:
Thanks for the tip. I dont suppose you'd have a link to where I could purchase those? |
| chopperthedog:
http://www.arcadeshop.com/i/194/wg-19v1001-22v1001-b-w-raster-cap-kit.htm good day. |
| Navigation |
| Message Index |
| Next page |
| Previous page |