Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: MApping AUX in AImTrak Config  (Read 1183 times)

0 Members and 1 Guest are viewing this topic.

Moksi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 194
  • Last login:April 20, 2024, 01:12:43 pm
  • I want to build my own arcade controls!
MApping AUX in AImTrak Config
« on: May 26, 2017, 03:57:56 pm »

I use the aimtrak with [PCXSR] to play Die Hard Trilogy,
But to setup the secondary buttons for grenades & rocketlauncher is a pain...
I sometimes get an option to change the AUX buttons in the Aimtrak config

but sometimes it also doesnt allow me to change the AUX buttons i just get to change the Trig Left and Right with the GP buttons
The Aux is necessary for grenades rockets in Die Hard Trilogy

How can i enable to change the Aux buttons in the config util
If anybody knows how i can change this with some type of method

firmware is the latest 9.15
Logged
Pages: [1]
  
Go Up
« previous next »