Arcade Collecting > Merit/JVL Touchscreen

Megatouch Ion Evo (2007 & 2013)

<< < (4/4)

mahkeymike:

--- Quote from: otsep on June 14, 2016, 11:11:18 pm ---On another note...  Have you ever repainted or fixed holes in these?  There are some holes where they had screws that were too long and punched through.

--- End quote ---

Bondo and touch up paint.

otsep:
That's what I figured.

Is there a particular brand/color that's been a good match?

lilshawn:
it's going to be tough because the finish on the cabinet is patterned with metalic. any additional paint is going to stick out like a sore thumb if you aren't careful.

I would almost strip the cabinet and repaint it.

I've used "duplicolor high performance wheel coating"  in the past to paint jukebox cabinets. it's made to paint wheels and plastic wheel covers... it sticks to the plastic/existing paint really well. it's not an exact color match (a little lighter), but having everything the same color with the same even "texture" will go miles. i'm not 100% sure they have that product anymore (now seems to be a 2 step color/clear coat ) 

http://duplicolor.com/product/hyper-silver-coating

so fill/sand your holes and spray the whole works.

otsep:

--- Quote from: lilshawn on June 14, 2016, 12:55:47 pm ---the ram is shared by the video. so if the allocation of the bad ram is in the video part. the computer will start to POST, but fail. so fans spin up and things look okay, but no video is being output.

--- End quote ---

Figured out the RAM issue.  Wrong damn speed.  The 2011 has PC3200 and for some reason the kit I had for the other on had PC2700.  Stupid error.

Navigation

[0] Message Index

[*] Previous page