Main > Raspberry Pi & Dev Board
Sound issue in MAME
Goochee64:
Hi
I am using the headphone jack on the Pi2.
What USB sound card are you using? Recommendations?
Are they easy to setup on the Pi?
nitrogen_widget:
There are settings you can put into the config.txt file to force which output the audio goes out of.
Actually all of that should be set-able in the raspiconfig script under advanced options.
Aceisback:
I use these:
http://www.ebay.com/itm/White-USB-2-0-2-1-Channel-Virtual-7-1-effect-Audio-Sound-Card-Adapter-3D-/370640380152?pt=LH_DefaultDomain_0&hash=item564be360f8
Yes, very simple to use. Plug N Play, but you have to make one change in a sound config file (can't remember which one at this time)> Adafruit.com sells them also and has a tutorial for using them. I have 4 Raspberry Pi systems in operation, and I use these on all of them.
Goochee64:
Thanks Ace
Got one on order now.
Cheers
Goochee64:
--- Quote from: Aceisback on June 05, 2015, 03:14:06 am ---I use these:
http://www.ebay.com/itm/White-USB-2-0-2-1-Channel-Virtual-7-1-effect-Audio-Sound-Card-Adapter-3D-/370640380152?pt=LH_DefaultDomain_0&hash=item564be360f8
Yes, very simple to use. Plug N Play, but you have to make one change in a sound config file (can't remember which one at this time)> Adafruit.com sells them also and has a tutorial for using them. I have 4 Raspberry Pi systems in operation, and I use these on all of them.
--- End quote ---
Got mine in from ebay and modified the ALSA Config as described here https://learn.adafruit.com/usb-audio-cards-with-a-raspberry-pi
Now Mame4All and NeoGeo don't work. As soon as you revert the ALSA Config back to default they work again. What The?
Sound is working for the other emulators
Any Ideas guys?
Cheers
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version