Arcade Collecting > Merit/JVL Touchscreen
Megatouch EVO repair - No signal
lilshawn:
the bootstrap deal is just the system trying to boot from a network image. it can be ignored.
enter the BIOS and make sure the harddrive is being detected in there...and set to be booted off of.
justtaint:
It's not being detected during POST in the Megatouch. Haven't had the opportunity to look at it in another pc.
My friend has decided to upgrade to a SSD, so I'll be buying a SSD and new security key from Ebay.
Anything I should watch out for?
mahkeymike:
Make sure its IDE.
justtaint:
2010.5 Force SSD and security key ordered from eBay.
2 x 256 MB SDRam ordered from Newegg (an upgrade from 64MB)
New lock and key backordered from Suzo-Happ (will tape it shut for the mean time).
Time to track down some fans and then I hope everything is complete.
justtaint:
New fans, SSD, security key all installed. 2 x 256MB sticks of ram should be waiting for me when I get into work tomorrow.
I need to set it to free-play, but I'm sure that's in the manual somewhere.
The only issue I have left is a bit of video glitching. Hopefully I haven't done all this work in vain.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version