Arcade Collecting > Merit/JVL Touchscreen

Megatouch EVO repair - No signal

<< < (9/12) > >>

justtaint:
I get that Windows won't see the drive, but it should register in the bios if the drive is working correctly.  That would rule out a bad ide cable or connector on the mobo, no?
Neither of those two are likely, and I don't want to do too much more work. 

Are there links to CD images anywhere?

ed12:
no it will not reg in bios to my know...
merit has a d/l site for them files..
with the proggie i chatted about u can c if the drive can be seen at all
:without: playing with the jumpers..which out-side of linux is a bad move..
for the merit site u will need to install d/l manager >there< d/l/m..
if it is even up?
if not as u are usa? ask a usa user for a copy.
u :must: burn it to iso,then install it..
personaly the olny way i have done it is to clone,works perfect every time
"easeus to do backup" is the file name for windows
but your problem if it is the boot sector and or bad h-d,will be a fresh drive and a fresh install
remeber u must spec your "country" code
ie usa,canada,uk
as these are key depented

ed

justtaint:
Yes, USA.

mahkeymike:
If you connect the hard drive to another computer and it doesnt get detected in the bios, then its most likely dead. I would download the ISO and burn it to a dvd and see if it detects the hard drive. If not, then you need to get an IDE hard drive atleast 8gb. I think thats the minimum size for all force versions. I know i have 2011 force installed on a 8gb CF card.

ed12:
yes 8gig

i have never had a good merit hard drive detect in bios of any kind
with out moving the jumpers. which btw was my point.
i can use the 2 proggies i spoke of and not move the jumpers and see every parition
about 4-5
they start ext,#,#,ext,#
in that order
the # i take it are the back-up's >re-load<,and or a .dat of the ,
 sw *8 on any merit,will fource the re-load of the o/s

ed

Navigation

[0] Message Index

[#] Next page

[*] Previous page